Samsung SCO-2370N User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCO-2370N
  6. User manual
Samsung SCO-2370N User Manual

Samsung SCO-2370N User Manual

High resolution 37x weatherproof camera
Hide thumbs Also See for SCO-2370N:
Table of Contents

Advertisement

Quick Links

Download this manual
High Resolution 37x
Weatherproof Camera
User Manual
SCO-2370

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCO-2370N

Summary of Contents for Samsung SCO-2370N

  • Page 1 High Resolution 37x Weatherproof Camera User Manual SCO-2370...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCO-2370 SERIES • NTSC MODEL • PAL MODEL SCO-2370N SCO-2370P ■ MODEL DESCRIPTION • SCZ-2370X _ SIGNAL SYSTEM •...

  • Page 4: Safety Information

    safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 fi re or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.

  • Page 6: Fcc Statement

    safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Important Safety Instructions

    important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...

  • Page 8: Table Of Contents

    contents Features INTRODUCTION What’s included Component names and functions Connecting to Monitor INSTALLATION & Connecting to Power CONNECTION RS-485 Communication control Using Coaxial Communications Menu Confi guration SETUP Menu Setup Troubleshooting TROUBLESHOOTING Specifi cations SPECIFICATIONS Dimension STW Protocol Command Description STW PROTOCOL COMMAND DESCRIPTION 8_ contents...

  • Page 9: Introduction

    Areas to even out the overall brightness. Communication RS-485, Coaxial communication methods are supported. - RS-485 Communications : SAMSUNG-T, SAMSUNG-E, Pelco-P, Pelco-D, Vicon, Panasonic, Bosch, Honeywell, AD - Coaxial Communications : Pelco Coaxitron Temperature control The built-in heater &...

  • Page 10: What's Included

    introduction WHAT’S INCLUDED Check if the following items are included in the product package. L-type hexagon wrenches SCO-2370 Sunshield (4.0mm) High Resolution 37x Weatherproof Camera User Manual SCO-2370 Sunshield Adaptor (1EA) Tapping Screw (3EA) User Guide High Resolution 37x Weatherproof Camera Quick Set-up Guide SCO-2370 Quick Set-up Guide...

  • Page 11: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS Front ❶ ➋ ➌ ➍ ➎ ➏ ➊ Camera Sunshield ➋ Sunshield adaptor : Fixing the sunshield onto the camera. ➌ Lens ➍ Video Output Terminal to Monitor : Used for monitoring of video output When camera installation.
  • Page 12 introduction Back ❶ ➋ ➌ ➍ ➊ Power input terminal : Connect the power as specified for each model here. ➋ MD Output Terminal : Motion detection signals are output through this terminal. ➌ RS-485 control terminal : You can control SETUP MENU through this port by using external controllers like a Remote controller that RS-485 Communication is supported.
  • Page 13 COMPONENT NAMES AND FUNCTIONS Heater & Fan This product is equipped with built-in heater & fan, and capable of maintaining appropriate internal temperature as well as defrosting and dehumidification. Front cover Heater While powered, the heater operates according to the camera’s internal temperature. (Note that the fan always operates if powered.) While the camera is powered, the heater operates if its internal temperature drops below 0 °C.

  • Page 14: Installation & Connection

    installation & connection CONNECTING TO MONITOR Please connect the video output terminal located on the back of the camera to the monitor. Monitor CCD Camera The connection method varies depending on the type of monitor and accessories.Please refer to the user’s manual for each instrument. Please turn off the power when connecting.

  • Page 15: Connecting To Power

    CONNECTING TO POWER The recommended adaptor specification for SCO-2370N/P is AC 24V/1.5A over. Please check the standard power requirement before connecting the power. ---- Power Input Terminal When the resistance value of copper wire is at [20°C(68°F)] Copper wire size(AWG) #24(0.22mm²)
  • Page 16 8-NONE-1 DISABLE  When making a control system to control the camera, please use to the protocol(SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYELL, AD).  When you connecting to RS-485 CONTROL TERMINAL, please peel off the outer skin inside the RS-485 CONTROL TERMINAL.

  • Page 17: Using Coaxial Communications

    USING COAXIAL COMMUNICATIONS Coaxial Communications System OSD Control method CAMERA CONTROLLER MENU/ENTER OSD KEY UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT : BNC • • ---- : RS-485 - Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds...

  • Page 18: Setup

    setup MENU CONFIGURATION MAIN SETUP MENU ● OFF ● ON SSDR ● ATW ● MANUAL ● AWC WHITE BAL ● OUTDOOR ● INDOOR ● OFF ● BLC ● HLC BACKLIGHT ● OFF ● ON MOTION DET ● MODE ● ZOOM TRACK ●...

  • Page 19: Menu Setup

    MENU SETUP Use the Function Setup switch within the camera. Function Setup switch Press the Function Setup switch for 2 seconds. (Short-pressing the Function Setup Switch activates the AUTO FOCUS). Main setup menu is displayed on the monitor screen. MAIN SETUP Change the status Select the function SSDR...
  • Page 20 SSDR (Samsung Super Dynamic Range) SSDR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the overall brightness of images with high contrast between bright and dark spots. When the SETUP menu screen is displayed, MAIN SETUP select ‘SSDR’...
  • Page 21 Select one of the following 5 modes, as appropriate for your purpose. ATW : Select this when the color temperature is between 1,800˚K and 10,500˚K. MANUAL : Select this to fi ne-tune White Balance manually. Set White Balance fi rst by using the ATW or AWC mode. After that switch to MANUAL mode, fi...
  • Page 22 setup Select a desired mode using the Function Setup switch depending on the camera purpose. OFF : Not being used BLC SETUP BLC : Enables a user to directly select a desired area from a picture, and to view LEVEL the area more clearly.
  • Page 23 HLC : Enable the user to change the level, HLC SETUP mask tone area. LEVEL MIDDLE MASK TONE IIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII RETURN  For effective viewing of license plates, there is a minimum required illumination and the shutter speed needs to be faster than 1/200sec. ...

  • Page 24: Motion Detection

    setup MOTION DETECTION This product has a feature that will detect movements of objects in 8 different areas on the screen. The camera detects an object’s movement by sensing disparity of outline, brightness levels and color. The camera sends a detection signal out via the MD output terminal and will zoom into a pre-determined point.
  • Page 25 START ZOOM : By moving the Function SMART ZOOM SETUP Setup switch in the ‘SMART ZOOM’ item to select the zoom position from 1x to 37x START ZOOM to be returned after the ‘SMART ZOOM’ TARGET ZOOM action is over. DWELL TIME 5 SEC TARGET ZOOM : Use the Function Setup...
  • Page 26 setup - AUTO : Select AUTO and press the ZOOM POS SETUP Function Setup switch to confi rm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions using the Function Setup switch while verifying the changes on screen. Enabling D-ZOOM (ON) means that digital zoom will : TELE : WIDE...
  • Page 27 ZOOM TRACK : Select ‘ON’ for the FOCUS SETUP ‘SMART ZOOM’ item in the MOTION MODE AUTO DETECTION menu and press Function ZOOM TRACK AUTO TRACK Setup switch to change the settings for the ZOOM SPEED FAST ‘SMART ZOOM’ function. D-ZOOM Use the Function Setup switch in the ZOOM POS INIT...
  • Page 28 setup ZOOM POS INIT : Moves to the controlled FOCUS SETUP ZOOM position when the power is truned on MODE AUTO and the initial ZOOM position has been set. ZOOM TRACK AUTO TRACK AUTO : If you turn the power off and on, ZOOM SPEED FAST the zoom magnifi...
  • Page 29 EXPOSURE Press the Function Setup switch to access MAIN SETUP the main setup menu and then position the SSDR indicator over ‘EXPOSURE’ using the Function WHITE BAL Setup switch. BACKLIGHT Press the Function Setup switch to confi rm. MOTION DET FOCUS EXPOSURE SPECIAL...
  • Page 30 setup SHUTTER : Control image brightness by EXPOSURE SETUP adjusting shutter speed. BRIGHTNESS IIIIIIIIII IIIIIIIIIII ➊ Position the indicator over ‘SHUTTER’ using IRIS AUTO the Function Setup switch. Then select SHUTTER the desired shutter mode (A.FLK, ESC, HIGH MANUAL) using the Function Setup switch. SSNR3 MEDIUM MANUAL : Manual shutter speed setting.
  • Page 31 SSNR3 (Samsung Super Noise Reduction): On screen noise reduction. LOW : Low noise reduction MEDIUM : Medium noise reduction HIGH : High noise reduction OFF : Disabled  Changing the ‘AGC’ setting from LOW to HIGH results in greater sensitivity, as well as on screen noise.
  • Page 32 setup SPECIAL Press the Function Setup switch to access MAIN SETUP the main setup menu and then position the SSDR indicator over ‘EXPOSURE’ using the Function WHITE BAL Setup switch. BACKLIGHT Press the Function Setup switch to confi rm. MOTION DET FOCUS EXPOSURE SPECIAL...
  • Page 33 DAY/NIGHT : You can display pictures in SPECIAL SETUP color or black and white. PRIVACY ➊ When the SETUP menu screen is DAY/NIGHT AUTO displayed, select ‘DAY/NIGHT’ using the Function Setup switch so that the arrow SYNC COMM ADJ indicates ‘DAY/NIGHT’. IMAGE ADJ ➋...
  • Page 34 ‘COMM ADJ’. ➋ Set up the mode moving the 4 direction of the Function Setup switch. PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T/PELCO-D/ PELCO-P/ BOSCH/HONEYWELL/VICON/AD/SAMSUNG-E/PANASONIC) CAM ID : Determines the camera's identifi cation number (between 0 and 255). BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
  • Page 35 CONTROLLER CONTROLLER CONTROLLER CONTROLLER RET PKT : You can choose whether to send an ACK signal when the communication control command is issued to the camera. IMAGE ADJ : Includes image quality or SPECIAL SETUP special function factors. PRIVACY ➊ When the SETUP menu screen is displayed, select DAY/NIGHT AUTO ‘IMAGE ADJ.’...
  • Page 36 setup H-REV : You can fl ip the picture IMAGE SETUP horizontally on the screen. H-REV V-REV : You can fl ip the picture V-REV vertically on the screen. SHARPNESS SHARPNESS : As you increase this RETURN value, the picture outline becomes stronger and clearer.
  • Page 37 USER : Please use this menu item when using USER MONITOR SETUP a monitor other than standard ones. GAMMA 0.55 You can change the gamma, PED level, and color gain in the sub menus. PED LEVEL IIIIIIII IIIIIIIIIIIIIIIIIIIII COLOR LEVEL IIIIIIIIIIIIIIIII IIIIIIIIIIII RETURN DISPLAY : Use this feature to designate a...
  • Page 38 setup  Correcting Mistakes Move the cursor th ‘CLR’ and press the Function Setup switch to clear the entire entry. To modify one character, use LEFT or RIGHT to position the cursor above the character to be modifi ed and click the Function Setup switch after selecting the character to enter. ➎...

  • Page 39: Troubleshooting

    troubleshooting TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. PROBLEM SOLUTION Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are fi xed properly. Check that you have properly connected VIDEO cable to the camera VIDEO output jack.

  • Page 40: Specifications

    SPECIFICATIONS SCO-2370N SCO-2370P Video Imaging Device 1/4” Exview HAD CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2 : 1 Interlace Synchronization Internal / Line Lock Frequency H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz...
  • Page 41 Coaxial Control ( SPC-300 Compatible ), RS-485 Coax : Pelco-C ( Coaxitron ) Protocol RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon, AD Environmental Operating Temperature / Humidity -50°C ~ +50°C (+14°F ~ +122°F) / Less than 90% RH...

  • Page 42: Specifi Cations

    specifications DIMENSION 42_ Specifications...
  • Page 43 MEMO English_43...
  • Page 44 STW protocol command description STW PROTOCOL COMMAND DESCRIPTION Byte1 Byte2 Byte3 Command Packet CAM ID HOST ADDR Return Packet CAM ID HOST ADDR Command Name Checksum CHECKSUM CALCULATION : UNARY OPERATION OF SUMMAT ION FROM BYTE2 TO BYTE9. EX) CHECKSUM = ~(BYTE2+BYTE3+... +BYTE8+ BYTE9); Function Reset all data to factory default value.
  • Page 45 B yte4 ll Byte5 Byte 6 Byte7 Byte8 Byte9 Byte10 Byte11 CAMMAND DATA3 DATA4 DATA5 DATA6 CHECKSUM CAMMAND DATA3 DATA4 DATA5 DATA6 CHECKSUM 000Fh CHECK SUM 000Fh CHECK SUM 0100h CHECK SUM 0100h CHECK SUM 0200h CHECK SUM 0200h CHECK SUM 0040h CHECK SUM 0040h...
  • Page 46 STW protocol command description Function Command Packet CAM ID HOST ADDR Return Packet CAM ID HOST ADDR ZOOM Direct Parameter P1, P2 : OPTICAL ZOOM = 0000h~06EAh P3 : DIGITAL ZOOM = ((256*10)/Ratio)-1 EX) D-ZOOM 1.1x : P3 = E7h = ((256*10)/11)-1, Ratio 11 me ans 1.1x. D-ZOOM 2.0x : P3 = 7Fh = ((256*10)/20)-1, Ratio 20 me ans 2.0x.
  • Page 47 00FFh CHECK SUM 00FFh CHECK SUM 0000h CHECK SUM 0000h CHECK SUM 0045h CHECK SUM 0045h CHECK SUM 0003h CHECK SUM 0003h CHECK SUM 0007h CHECK SUM 0007h CHECK SUM 0005h CHECK SUM 0005h CHECK SUM English_47...
  • Page 48 STW protocol command description Function Display OSD menu on the screen. Clear OSD menu and save current menu setup. Command Packet CAM ID HOST ADDR OSD Menu On/Off Return Packet CAM ID HOST ADDR Parameter P1 : 00h = ON 01h = OFF Function Move OSD arrow to up.
  • Page 49 00B1h CHECK SUM 00B1h CHECK SUM 0008h CHECK SUM 0008h CHECK SUM 0010h CHECK SUM 0010h CHECK SUM 0004h CHECK SUM 0004h CHECK SUM 0002h CHECK SUM 0002h CHECK SUM 0100h CHECK SUM 0100h CHECK SUM 0200h CHECK SUM 0200h CHECK SUM English_49...

  • Page 50: Declaration Of Conformity

    DECLARATION OF CONFORMITY Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera...
  • Page 51 MEMO...
  • Page 52 MEMO...
  • Page 53 MEMO...
  • Page 54 MEMO...
  • Page 55 MEMO...
  • Page 56 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungtechwin.com...

This manual is also suitable for:

Sco-2370pScz-2370x

Table of Contents