Related Manuals for Samsung SCO-2080N
Summary of Contents for Samsung SCO-2080N
- Page 1 High Resolution Day & Night Varifocal Lens Camera SCO-2080 User Guide Before installing and operating this product, please read this manual thoroughly. ENGLISH...
- Page 2 Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model description. SCO-2080 SERIES MODEL DESCRIPTION intended to alert the user to the presence of uninsulated “dangerous voltage” a risk of electric shock to persons.
- Page 3 Front Back places that are exposed to the dust and rain. Adjust to lens Communication Connection SSNR3 (Samsung Super Noise supported. Reduction) Function provide clear images even in dark environments. DAY&NIGHT(ICR) Miscellaneous Functions selects the mode that is appropriate for daytime or of the image.
- Page 4 Precautions Do not install under extreme Do not install in high humidity Warnings & Cautions temperature conditions. Notes Use only under temperature conditions May lower image quality. between -10°C and +50°C. Provide flood, such as under the eaves, to operate properly. good ventilation when using in high temperature conditions.
-
Page 5: Components And Accessories
Components and Accessories Precautions Do not drop the camera or subject it to physical shock. strong light directly. Overview May cause a product malfunction. May damage the CCD. FRONT Do not expose the camera to Radioactivity exposure may damage the CCD. -
Page 6: Adjust To Lens
Overview Adjust to Lens Adjust the lens's zoom and focus Notes 1. Remove the sunshield from the camera. 2. Remove the front cover from the camera by turning it counterclockwise. 3. Unlock the Zoom or Focus lever before adjusting the lens. again. -
Page 7: Connecting To Monitor
Connection Connecting to Monitor The recommended adaptor specification for SCO-2080N/P is DC 12V/ 500mA , Please connect the video output terminal located on the back of the camera to the AC 24V / 500mA. monitor. Please check the standard power requirement before connecting the power. - Page 8 RIGHT RIGHT KEY JOYSTICK RIGHT Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Controller or DVR. (1) Connection to a PC. Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.
-
Page 9: Operating Your Camera
Operating Your Camera Menu Configuration MAIN SETUP 1.LENS MAIN SETUP 2.EXPOSURE LENS 3.WHITE BAL 4.SSDR BRIGHTNESS SHUTTER EXPOSURE 5.BACKLIGHT SENS-UP RETURN 6.SSNR3 7.DAY/NIGHT AUTO OUTDOOR INDOOR WHITE BAL 8.SPECIAL MANUAL AWC SET 9.EXIT SAVE SSDR BACKLIGHT 2. Select a desired function using the Function Setup switch. SSNR3 DAY/NIGHT COLOR... - Page 10 Operating Your Camera - FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings Notes mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode. Notes AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the higher the noise.
- Page 11 Operating Your Camera Select one of the following 5 modes, as appropriate for your purpose. 1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the switch so that : Select this when the color temperature is between 1,700˚K and 11,000˚K. the arrow indicates ‘SSDR’.
- Page 12 Operating Your Camera HLC (High Light Compensation) : SSNR3 If the scene contains extremely bright light areas such as; from car headlights, the This function reduces the background noise in a low luminance environment. light can mask out much of the on-screen detail. 1.
- Page 13 Operating Your Camera - BURST MODE : You can turn on or off the burst signal on B/W mode. AUTO SETUP 1.BURST MODE - DURATION : You can select brightness of illumination 2.COLOR B/W You can display pictures in color or black and white. DURATION FAST about changing the day/night mode.
- Page 14 Operating Your Camera IMAGE ADJ. : 1) When the SETUP menu screen is displayed, select ‘IMAGE ADJ’ by using the Function 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup Setup switch so that the arrow indicates ’IMAGE ADJ‘. switch so that the arrow indicates ‘SPECIAL’.
- Page 15 Operating Your Camera CAM TITLE : If you enter a title, the title will appear on the monitor. SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize the output phase 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the of multiple cameras using the power arrow indicates ‘CAM TITLE’.
- Page 16 - DISP ID : Display camera title on top left corner of the screen. 2) Set up the mode using the Function Setup switch. - PROTOCOL : You can select one of various protocols. SAMSUNG-T, PELCO-P, PELCO-D, - AREA : You can select up to 12 PRIVACY areas.
-
Page 17: Troubleshooting
Flip / Mirror On / Off Communication Coaxial, RS-485 Check that direction of camera turns toward the Sun. Coaxial(Pelco), RS-485(SAMSUNG-T, PELCO-P, PELCO-D, VICON, PANASONIC, Protocol BOSCH, HONEYWELL, SAMSUNG-E) ENVIRONMENTAL Make sure that the camera and monitor are installed within the recommended distance. - Page 18 Dimension Ø77 86mm 274.7mm Ø79.8 244.7mm COLOR CCD CAMERA User Guide COLOR CCD CAMERA User Guide...
- Page 19 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...