Samsung SCO-2080RH User Manual page 21

on
n
EXPOSURE
1. When the SETUP menu screen is displayed,
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.
2. Select a desired mode using the Function
Setup switch.
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select either auto or
manual shutter.
- ESC : Select this to control the shutter
speed automatically. If ESC
is selected, the shutter speed
is automatically controlled
depending on the ambient illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
- A.FLK : Select this when you experience picture fl icker, which can happen
when there is a clash with the frequency of the installed lighting.
- --- : Shutter speed is fi xed at 1/60sec(1/50sec).

When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the
camera automatically detects the
light level and maintains a clear
picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
RETURN : Select this to save the changes in the EXPOSURE menu and return to the
SETUP menu.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER ESC
3.AGC HIGH
4.SENS-UP OFF
5.RETURN
LIMIT
AUTO
Press SET to Return
English_21
25
x2