Samsung SCO-2080RH User Manual page 24

Setup
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to minimize white out due to over exposure and
preserve much of the on-screen details when the camera aims a strong light source.
- LEVEL : Adjust level of the HLC function.
- LIMIT : Enable to change the operating condition.
- MASK COLOR/TONE :
Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the switch.
Select 'BLC' to adjust the area to be
enhanced then adjust the level.
BLC SETUP
LEVEL
TOP
BOTTOM
LEFT
RIGHT
Press SET to Return

Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.

When dark, the HLC is only activated when a bright light exceeding a specifi c size in NIGHT ONLY
mode.

The HLC is not activated in day light or when bright light is not present at night in NIGHT ONLY
mode.

BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
24_ Setup
HLC : Enable the user to change the level,
limit, mask color/tone and area.
MIDDLE LEVEL
38 LIMIT
MASK COLOR
109
MASK TONE
54
TOP
121
BOTTOM
LEFT
RIGHT
HLC SETUP
MIDDLE
NIGHT ONLY
BLACK
1
0
100
5
166
Press SET to Return