Connection
CONNECTING TO MONITOR
Please connect the Video output jack located on the back of the camera to the monitor.
E)
e
CONNECTING TO POWER
The recommended adaptor specifi cation for SCO-2080RH is AC 24V/2A over.
Please check the standard power requirement before connecting the power.
( Recommend AC 24A/2A over adaptor for a long-distance.)
If not using the heater, you can use an adaptor of DC 12V/4A for the power source.
y
Camera
The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
Please turn off the power when connecting.
Monitor
POWER
English_15