Network Configuration Options - Kodak Scan Station 520EX Administrator's Manual

Network
configuration options
3-6
Before you can start adding Scan Stations you must know the IP
address or the Scan Station's device name; preferably both.
Whether you are administrating a Scan Station that is located next to
you or across the country on the same network, you must have this
information before administering a Scan Station using the KSS500 -
Scanner Admin application.
To get the name of your Scan Station:
1. Be sure the Scan Station on and the application is running.
2. Click on the Information icon to display the Scan Station's name or
IP address if the network has DHCP enabled.
If your Scan Station is currently connected to a network, the About
screen will also display the IP address that has been assigned to your
Scan Station.
A-61628 March 2010