Kodak Scan Station 520EX Administrator's Manual page 28

A-61628 March 2010
2. If desired, select Device/Administrator Password to password-
protect the Scan Station. You will be asked to re-enter the password.
When finished, click Done.
NOTES:
• If you assign a device password, all users will be prompted to
enter this password every time they use the Scan Station. This
does not take the place of your Scan Station's administrative
configuration file password.
• If Force User Login is enabled, this password will be used as
the administrator account password.
3. Select Default Credentials to define the Username, Password,
and Domain required to access network resources.
• Select Username. Enter the network user name assigned to the
Scan Station's computer and click Done. For more information
see the section entitled, "Network Configuration details" in
Chapter 6.
NOTE: If you want the Scan Station to have access to network
printers or network shared folders, the user name must be
associated with a network account that has sufficient
privileges to access these resources.
• Select Password to enter the password for the network user
name. You will be asked to re-enter the password. When finished,
click Done.
NOTE: This password is only used by the Scan Station and will
never be displayed in readable form.
• Select Domain. Enter the Microsoft NT network domain name
which the Scan Station will be connected to. In a workgroup
environment, this field can be left blank.
3-15