Kodak Scan Station 520EX Administrator's Manual page 130

Your network Domain name
8-4
To find the domain name your Scan Station will use, follow these steps:
1. From a PC logged onto the same network/domain that the Scan
Station will use, right click on My Computer and select Properties.
2. From the Properties window select the Computer Name tab.
If you are on a domain, the Domain name is listed in the Domain field
(see above).
3. Copy the Domain name so you can enter it into the Domain field of
the Default Credentials in the Configuration Organizer.
4. Go to the Configuration Organizer and click the Device icon and
select Default Credentials, then select
5. Enter the Domain name on the virtual keyboard and click OK.
Domain.
A-61628 March 2010