Network Configuration Options; Adding A Scan Station - Kodak Scan Station 700 Administrator's Manual

Network
configuration options
Adding a Scan
Station
A-61796 December 2013
Before you can start adding or discovering Scan Stations you must
know the IP address or the device name; preferably both.
To get the name of your Scan Station:
1. Be sure the Scan Station is on and operational.
2. Click on the Information icon
name and IP address if the Scan Station is connected to a network.
Before adding a Scan Station to manage remotely, it is suggested that
you obtain the Scan Station name(s) and/or IP addresses and
passwords of the Scan Stations you want to add.
NOTE: The Scan Station will only have an IP address if the Scan
Station is connected to a network and has been configured.
As Scan Stations are added, the main screen will be updated.
1. Select Scanner>Add Scanner. The Add Scanner dialog box will be
displayed.
2. Enter the name of the Scan Station in the Scanner Name field.
NOTE: Acceptable values in this field are: alphanumeric characters
and a dash. No spaces or other symbols are allowed.
3. Enter the IP address. The IP address must be in IPv4 format
xxx.xxx.xxx.xxx.
on the Scan Station to display the
9-5