3-16
4. The Scan Station can be configured to have updates occur at
specific days and times. Select Remote Configuration Settings to
allow your Scan Station to be remotely configured. This method is
useful when you want to set up specific days and times for the Scan
Station to have updates automatically occur. Refer to the section
entitled "Updating your Scan Station" (Method 2) in Chapter 6 for
more information. When selected, the Remote Configuration
Settings screen will be displayed.
- Enter a network folder where the Scan Station will find updated
configuration settings.
- Select which day(s) of the week this operation will be performed.
- Select the time of day you want your Scan Station to check for
updates.
5. Click Done.
NOTE: When updating a configuration using this method, the following
fields will not be updated: Device Name, IP Address and
Device Password.
A-61628 March 2010