Kodak Scan Station 520EX Administrator's Manual page 31

3-18
5. Select Credentials to define the email server credentials.
NOTE: If you are using an unauthenticated SMTP server, you do
not need to make any selections in the Credentials fields.
6. Enter a Username, Password and an optional Domain name on
the Credentials screen for the email server account that the Scan
Station will log into. Even though these credentials may be the same
as the Default Credentials, they must still be defined here.
7. Click Done.
8. Most email servers communicate on Port 25. If your email server
communicates on a different port, click Port.
9. Enter a new Port number and click Done.
10. The default for SSL is Do not use SSL. If your email server requires
Secure Socket Layer (SSL), select SSL and enable Use SSL and
click Done.
11. Select Authentication Scheme to select the specific SMTP
Authentication Scheme used by your mail server. Select from the
following options:
• Use Strongest
• None
• Plain
• Login
• MDS Challenge Response
• NTLM
NOTE: Use Strongest will select the strongest available
authentication scheme reported by the mail server. For
more information on authentication schemes, consult your
network administrator.
A-61628 March 2010