Kodak Scan Station 520EX Administrator's Manual page 21

3-8
7. Click Add. The Scanner name and information will be added to the
listing on the KSS500 - Scanner Admin main screen.
NOTES:
• If the Scan Station is not found or if you are adding a Scan
Station that will be installed on the network at a later time, the
message There was an error communicating with the device,
would you like to Add it anyway? will be displayed. Click Yes
to add the Scan Station.
• If an incorrect IP address is entered, you may have to delete the
Scan Station information from the KSS500 - Scanner Admin main
screen and add it again with the correct information.
8. Follow Steps 1 - 7 to add additional Scan Stations to this group.
A-61628 March 2010