Adding A New Device To A Rs232 Library; Adding A New Rs232 Function To A Device - AMX Novara 1000 Series Operation/Reference Manual

Adding a New Device To a RS232 Library

1.
Click the Add New Device button in the Edit options (see FIG. 34) to invoke the Add New Device
window (FIG. 35).
FIG. 35 AMX RS232 Library dialog - Add New Device window
2.
Enter the Device Make and Description, then click Save Device. This opens a new AMX RS232 Libraries
dialog for the new device (FIG. 36).
FIG. 36
AMX RS232 Library dialog (for a new device)
3.
Enter a Function (in the Enter Function field).
4.
Use the Bytes drop-down menus to enter the command string.
5.
Specify the Device Protocol settings.
6.
Click the Save Edit button (in the Edit options).

Adding a New RS232 Function to a Device

1.
Click the Add New Function Command Bar button (see FIG. 30 on page 50). This opens the AMX
RS232 Libraries dialog.
2.
Select the relevant device, and fill in the function information as described above.
3.
Click the Save Function button (in the Edit options) to save the new Function.
Novara ControlPads & KeyPads
New Device name
Save Edit
AMX NOVARA DCS1000 Device Configuration Software
New Function name
Copy Functions
53