AMX Network Lighting Solution ALD-H48 Instruction Manual page 38

Advanced Programming
Command Feedback (Cont.)
String
LIGHTSTATE-<index>,
PROPERTY-<key>,<value>
SERIALNUMBER-<number>,<bus>
SETADDRESS-<state>,
TIME-<time>
VERSION-<version>
32
Description
Feedback for the Dimmer state.
<state>
<index>: 1..n = index of the Dimmer
<state>: ON, OFF
Example: (assuming that there is a Dimmer stored at index 1)
LIGHTSTATE-1,ON
Feedback for the property query.
<key>: IP_Address
<value>: actual key value
Example:
PROPERTY-Password,jetski
This reply is received while the H48 is in programming mode and
a dimmer has been triple-tapped. This reply will notify you of the
dimmer's serial number that has been triple-tapped.
<number>: serial number of the triple-tapped dimmer
<bus>: 1..6 = bus number dimmer is on
Example:
SERIALNUMBER-12466768689,1
Reply received after a successful dimmer address assignment.
<addr>,
<state>: SUCCESS
<serialNum>
<addr>: new dimmer address
<serialNum>: serial number of the dimmer
Example:
SETADDRESS-SUCCESS,[1:4:1:1:1],12466768689
Feedback for the current time. Military time format. This reply is
received asynchronously approx. every 1 minute.
<time>: string
Example:
TIME-13:24:10
Feedback for the module version.
<version> string
Example:
VERSION-1.0.0
Password
0 = invalid/unrecognized bus
ALD-H48 Lighting Controller