AMX Network Lighting Solution ALD-H48 Instruction Manual page 31

Command Interface (Cont.)
Command
?KEYPADIDX-<addr>
KEYPADREMOVEIDX-<index>
KEYPADREMOVEADDR-<addr>
ALD-H48 Lighting Controller
Description
Get the keypad index for the keypad address specified. This
command is always issued on port 1.
<addr>: keypad address
Example:
?KEYPADIDX-[1:5:1]
Remove a keypad component from the list. Once removed, you will no
longer be able to control or receive any feedback from that keypad.
This command is always issued on port 1.
<index>: 1..24 = index to remove
Example:
KEYPADREMOVEIDX-1
Remove a keypad component from the list. Once removed, you will no
longer be able to control or receive any feedback from that keypad.
This command is always issued on port 1.
<addr>: keypad address to remove
Example:
KEYPADREMOVEADDR-[1:5:1]
Advanced Programming
25