Table of Contents
Advertisement
FIG. 6 Modify Scene
3. Moving left to right the first field is a check box. Placing a check in the box includes the
dimmer in the scene.
Once you have all of your desired dimmers selected you can set the Delay time.
4. Type a number value in the field Delay Time.
The next field is the ramp time.
5. Type a number value in the field Ramp Time.
The next field is intensity.
6. Type a number value in the field Intensity.
7. Click Save to set your scene.
Global Adjustment allows you to select and deselect all dimmers at one time, and to set the Delay
Time, Ramp Time and Intensity values for all dimmers, to the same value.
When modifying scenes, ignored dimmers will display their current intensity level while dimmers
included in the scene will display their defined intensity level, not necessarily the current state.
ALD-H48 Lighting Controller
The delay time is the duration, in 1/10ths of seconds, it takes the dimmers to respond to
the button push.
The ramp time is the duration, in 1/10ths of seconds, it takes the dimmers to go from their
current intensity state to that set in the scene.
Intensity is a percentage value, 0-100%, for the luminosity of the light.
Using The Web Interface
9
Advertisement
Table of Contents
