Timer - Nokia Mediamaster 310 S User Manual

Navi Bars

Timer

General
You can program the Mediamaster to start and stop at predefined
times.
The timer function is very useful when you want to record a pro-
gramme and you are unable to start/stop the recording event
yourself, or when you just want to be reminded of the start of a
programme you do not want to miss.
From this menu you first must select a not already occupied line
before you press ok to go on with the Timer settings. If you have
made settings earlier and any of those are marked, that setting
will be replaced with the new one you are going to make!
Note! The timer function only works from standby mode!
A timer setting will not start when the box is already turned
on.
Set the Timer
• First, select the Channel List were the channel you want to
watch or record is located.
• Then, step to Channel to select desired TV/Radio channel.
• Set the Date for the timer, using the numerical buttons on the
remote control.
• If you enter a wrong digit, erase it with the
The different start times may never overlap each other. If you try
to enter a start or stop time within an already occupied period of
time you will get a warning message.
• Set the Start and Stop time using the numerical buttons on
the remote control.
• Press ok to save the settings or back to cancel.
Up to 8 different events can be predefined. In the Timer List the
events will be sorted in order of start time.
GB 30
button.