D-Series Camera Connections; Drop Ceiling Installation (Typical Installation); Figure 4: D-Series Camera Wiring Connections - FLIR D-Series Installation And Operation Manual

3.3 D-Series Camera Connections

WARNING: The Green/Yellow Ground wire must be properly connected in order for the
camera to operate properly.

3.4 Drop Ceiling Installation (Typical Installation)

WARNING! Make sure the Dome Camera and any other related equipment is powered off
during installation.
The FLIR Thermal Camera is designed to be mounted on the ceiling. A typical installation uses
the supplied housing enclosure, which conceals the main body of the camera in the ceiling,
showing only the camera dome. Alternatively, the camera can be installed hanging from the
444-00001-00-10 Revision 100

Figure 4: D-Series Camera wiring connections

Copyright © 2008 FLIR Systems, Inc. Page 12 of 32