Table of Contents
Advertisement
Chapter 2
Installation
This Chapter covers the physical installation of the Wireless Router.
Requirements
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45
connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and a DSL connec-
tion.
To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE 802.11g, IEEE 802.11b or IEEE 802.11n Draft specifications.
Procedure
Figure 4: Installation Diagram
2
Advertisement
Table of Contents
