LevelOne WBR-6010 User Manual page 23

Setup
Data - Wireless Screen
Identification
Region
Station name
SSID
Options
802.11 Mode
Channel No.
Extension
Channel
Broadcast
SSID
WMM Support
Bandwidth
Select the correct domain for your location. It is your responsibili-
ty to ensure:

That the Wireless Router is only used in domains for which
is licensed.

That you select the correct domain, so that only the legal
channels for that domain can be selected.
This is the same as the "Device Name" for the Wireless Router.
This is also called the "Network Name".

If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).

To communicate, all Wireless stations should use the same
SSID/ESSID.
Select the desired mode:

Off - If selected, the wireless function is disabled.

B only - Only 802.11b connections are available. 802.11g
Wireless Stations will only be able to use the Wireless Rou-
ter if they are fully backward-compatible with the 802.11b
standard.

G only - Only 802.11g Wireless stations can use the Wire-
less Router.

11b + g + n (Mixed) - 802.11.g, 802.11b and 802.11n Wire-
less stations will be able to use the Wireless Broadband
Router.
Select the Channel you wish to use on your Wireless LAN.

If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels to see which is the best.

If using multiple Access Points, adjacent Access Points
should use different Channels to reduce interference.
Select Down channel or Up Channel from the drop-down list.
If enabled, the Wireless Router will broadcast its SSID. This
allows PCs and other wireless stations to detect this Access
Point and use the correct SSID.
If disabled, PC users will have to manually enter the SSID and
other details of the wireless interface before they can connect to
this Access Point.
Enable this to use the WMM feature.
Select the desired bandwidth as required.
23