Operation and Status
Connection Status - Telstra Big Pond
An example screen is shown below.
Data - Big Pond Screen
BPA Status
Connection Status
IP Address
Subnet Mask
Default Gateway
Buttons
login
logout
Figure 50: Telstra Big Pond Status Screen
This indicates whether or not the connection is currently
established.
If the connection does not exist, the "Connect" button can
be used to establish a connection.
If the connection currently exists, the "Disconnect" button
can be used to break the connection.
Normally, it is not necessary to use the Connect and
Disconnect buttons unless the setting "Connect automati-
cally, as required" is disabled.
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
The Subnet Mask associated with the IP Address above.
The IP address of the remote Gateway or Router associated
with the IP Address above.
If not connected, establish a connection to Telstra Big Pond.
If connected to Telstra Big Pond, terminate the connection.
64