LevelOne WBR-6010 User Manual page 60

Operation and Status
WAN MAC Address
Connection Details
LAN
IP Address
Network Mask
DHCP Server
MAC Address
Wireless
Name (SSID)
Region
Channel
Wireless AP
Broadcast Name
System
Device Name
Firmware Version
Buttons
Connection Details
Attached Devices
Refresh Screen
It displays the MAC address for the WAN.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
The IP Address of the Wireless Router.
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
This shows the MAC Address for the Wireless Router, as
seen on the LAN interface.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
The current region, as set on the Wireless screen.
This shows the Channel currently used, as set on the Wire-
less screen.
This indicates whether or not the Wireless Access Point
feature is enabled.
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
The version of the current firmware installed.
Click this button to open a sub-window and view a detailed
description of the current connection.
This will open a sub-window, showing all LAN and Wireless
devices currently on the network.
Update the data displayed on screen.
60