Table of Contents
Advertisement
PC Configuration
3. Configure this screen as follows:
Enter the correct SSID, as used on the Wireless Router. Remember the SSID
is case-sensitive, so be sure to match the case, not just the spelling.
Set Network Authentication and Data Encryption to match the Wireless Router.
If using data encryption (WEP or WPA-PSK), enter the key used on the Wire-
less Router. See the preceding sections for details of WEP and WPA-PSK.
Uncheck the options The key is provided for me automatically and This is a
computer-to-computer (ad hoc) network.
Click OK to save and exit.
4. This wireless network will then be listed in Preferred Networks on the screen below.
5. Click OK to establish a connection to the Wireless Router.
Figure 45: Preferred Networks
57
Advertisement
Table of Contents
