Mounting On The Windshield - Uniden TRAX350 User Manual

Mounting on the windshield

Make sure the device does not block your view of the
road or your mirrors.
Once you decide where you want the device, hold the
suction cup in that position, then adjust the mount so you
have the best view of the device.
1)
2) Push the suction lock
up (towards the suction
cup) until it snaps into
place.
3) Gently pull on the
mount to make sure it is
secure.
If you have trouble getting
the suction cup to stick:
Clean the spot with an
ammonia-free cleanser.
Dry the spot completely
(use a lint-free cloth, if possible).
stick well on a curved or textured surface).
R
EMOVING THE T T W W WIND SHIELD MOUNT
When you release the suction latch, make sure
you're holding or somehow supporting the device.
Lift the suction latch and use the plastic pull tab to pull the
suction cup off of the glass.
How Do I Put It in My Car?
Flip the suction Flip the suction
latch up to lock latch up to lock
the windshield the windshield
mount into place. mount into place.
Page 19