Adjusting The Windshield Mount; Mounting On The Windshield - Uniden TRAX4310 Owner's Manual

Adjusting the Windshield Mount

Turn the windshield
mount arm to
a suitable angle for
mounting.

Mounting on the Windshield

Make sure the device does not block your view of the road or your mirrors.
Once you decide where you want the device, hold the suction cup in that position,
then adjust the mount so you have the best view of the device.
1) Press the suction cup flat against the windshield.
2) Push the suction lock up (clockwise) until it snaps into place.
3) Adjust the unit & bracket to a final position. Tighten the locking collar to secure.
4) Gently pull on the mount to make sure it is secure.
If you have trouble getting the suction cup to stick:
Clean the spot with an ammonia-free cleanser.
Dry the spot completely (use a lint-free cloth, if possible).
Make sure the spot is smooth and flat (suction cups won't stick well on a
curved or textured surface).
Removing the windshield mount
When you release the suction latch, make sure you're holding or somehow
supporting the device.
Lift the suction latch and use the plastic pull tab to pull the suction cup off of the glass.
Suction lock
Locking
collar
Page 11