Table of Contents
Advertisement
Adjusting the Windshield Mount
►
Bend the windshield mount arm to a suitable angle for mounting.
Mounting on the Windshield
Make sure the device does not block your view of the road or your mirrors.
Once you decide where you want the device, hold the suction cup in that position, then adjust the
mount so you have the best view of the device.
1)
Press the suction cup flat against the windshield.
2)
Push the suction lock up (towards the suction cup) until it snaps into place.
3)
Gently pull on the mount to make sure it is secure.
If you have trouble getting the suction cup to stick:
►
Clean the spot with an ammonia-free cleanser.
►
Dry the spot completely (use a lint-free cloth, if possible).
►
Make sure the spot is smooth and flat (suction cups won't stick well on a curved or textured
surface).
Removing the windshield mount
When you release the suction latch, make sure you're holding or somehow supporting the
device.
Lift the suction latch and use the plastic pull tab to pull the suction cup off of the glass.
Page 8
Advertisement
Table of Contents
