Uniden TRAX350 User Manual page 44

What Else Can I Do with Routes?
Use the
MOVE UP
before the one above it. For example, if you want to go to
Waypoint C before Waypoint A, use the move up button
to move Waypoint C to the top of the list, above Waypoint
A.
Use the
MOVE DOWN
waypoint after the one below it. For example, if you want
to go to Waypoint A after Waypoint B, use the move down
button to move Waypoint A to the bottom of the list, after
Waypoint B.
RECALCULATE
The device re-plots the route, starting from your current
plots the route from there to the next waypoint on the list,
and so on through the list of waypoints. Finally, it plots the
Until you tap the
will use the route as originally plotted, without the
edited waypoints.
Page 44
button to move the selected waypoint
button to move the selected
button.
button, the device
RECALCULATE