Tightening The Bracket Joint - Uniden TRAX350 User Manual

If the whole mount shifts out of position, the suction cup
probably isn't getting a good grip on the windshield. Try
removing the mount from the windshield and re-installing
it. See page 19 for hints on getting the suction cup to stick
better.
If the device shifts out of position even though the suction
cup itself stays in place, try tightening the bracket joint.
T T T
I GHTENIN T T G THE T T BRACKET JOINT
1)
Twist the Twist the
2 2
adjustment adjustment
lock clockwise lock clockwise
a few turns to a few turns to
tighten the tighten the
bracket joint. bracket joint.
2) Lift the adjustment lock, and twist the lock handle
clockwise two, maybe three turns.
3) Flip the adjustment lock back down and see if the bracket
still moves. If it does, repeat step 2.
4) If the adjustment lock won't go back down, the bracket
joint is too tight. Twist the adjustment lock one or two
I Have a Question
Lift the Lift the
1 1
adjustment adjustment
lock. lock.
Page 65