Ironman Fitness Gravity 4000 Owner's Manual page 11

3
Slide the bottom of the Pivot Arms (5) into the brackets,
located at each side of the Bed Frame (4), align to the
desired hole on the arm with the peg on the bracket.
Insert the peg into the hole to lock the Pivot Arms (5) in
place.
It is recommended that you use the bottom hole on the
Pivot Arms (5) until you become more familiar with the
equipment.
4
Install the Pivot Arm Ring (47) onto the Pivot Arms (5).
Mount the Bed Frame (4) to the Rear U-Frame (2) by
inserting the ends of the Pivot Arms (5) into the chan
nels on the plates. The slotted portion of the rollers on
the end of the Pivot Arms (5) should be inserted into
the channels on the plates.
5
Insert the Steel Heel Holder Brackets (7) with
Rubber Heel Holders (31) from both ends of
the Rear Rod (9).
Repeat above step to assemble the
other two Steel Heel Holder Brackets
(7) with Rubber Heel Holders (31) to
the Front Rod (11).
ASSEMBLY
A
-
5
3
7
31
31
7
11
5
4
B
47
5
2
11
9
5
47
47
5
7
31
31
7