Source Control And Rear Interface - Cisco TelePresence VX Clinical Assistant Installation And User Manual

Source Control and Rear Interface

The REAR INTERFACE provides video, audio, and computer connectivity. The
corresponding SOURCE CONTROLS found at the front of the VX Clinical Assistant
are designed to provide simple use and quick access to sources when in a call or for
local presentation.
VOLUME - Increase or decrease the volume output from the
system's speakers or connected headphones.
CAMERA CONTROL - Control the system's camera position.
ZOOM - Increase or decrease the system's camera zoom.
LAYOUT - Toggle through various screen layouts from the Cisco
Codec C20. Refer to the codec's documentation to understand the
various layouts when in a call and when not in call.
CAMERA - Present the system camera.
COMPUTER - Present the connected computer.
1-5 VIDEO SOURCES - Display the video sources connected to the
corresponding video inputs on the REAR INTERFACE.
1 HDMI IN or S-VIDEO IN (S-VIDEO ONLY if no HDMI signal present)
2 HDMI IN or S-VIDEO IN (S-VIDEO ONLY if no HDMI signal present)
3 DVI-I IN or S-VIDEO IN (S-VIDEO ONLY if no DVI signal present)
DVI-I IN and 3.5mm STEREO MINI PLUG
3.5mm QUICKSET MIC IN (for additional coverage)
USB 1-3 Used for diagnostics, firmware updates, and configuration.
4 COMPOSITE VIDEO IN
5 COMPOSITE VIDEO IN
6 COMPOSITE VIDEO IN (corresponds to
ANALOG VIDEO OUT (outputs signal from S-VIDEO IN 1, 2, 3 and
COMPOSITE VIDEO IN 4, 5, 6)
141299.21 Cisco TelePresence VX Clinical Assistant
if no DVI signal present)
TM CTS-CA2-K9/CTS-CA2-P240V-K9 v1.2 | 2013 JAN | © 2012-2013 Cisco Systems, Inc. All rights reserved.
- SOURCE CONTROLS -
- REAR INTERFACE -
[ DIGITAL INTERFACE ]
[ ANALOG INTERFACE ]
26