Laptop Shelf - Cisco TelePresence VX Clinical Assistant Installation And User Manual

Installing Options

Laptop Shelf

1. Remove the WORK SURFACE
• Unscrew the screw at bottom of WORK SURFACE
• Lift and pull the WORK SURFACE from the system
to remove.
• If needed, flip the codec up to gain access to the
side holes for mounting the shelf by removing the
small Phillips screw at the bottom of the codec
shelf.
2. Mount the LAPTOP SHELF to the system with the
supplied screws (4) as shown.
To operate the LAPTOP SHELF, pull the knob to release
the tray's locking mechanism and slowly swing the tray
to lock in the closed position (under the work surface)
or in the extended position.
CAUTION: During adjustment of laptop tray, the spring-
loaded knob may pinch finger if the knob is grasped
beyond the knob's head, and pinching may occur while
the tray is adjusted.
141299.21 Cisco TelePresence VX Clinical Assistant TM CTS-CA2-K9/CTS-CA2-P240V-K9 v1.2 | 2013 JAN | © 2012-2013 Cisco Systems, Inc. All rights reserved.
2
1
13