Scope Hooks; Wireless Access Point Mount; Splash Cover - Cisco TelePresence VX Clinical Assistant Installation And User Manual

Mobile video system
Hide thumbs Also See for TelePresence VX Clinical Assistant:
Table of Contents

Advertisement

Installing Options
To properly mount the optional SCOPE HOOKS,
WIRELESS ACCESS POINT MOUNT, and SPLASH
GUARD, remove the BACK PANEL of the MONITOR
SUPPORT COLUMN by removing the THUMB SCREW
located at the top of the support column. This provides
access to mount the options.
Each of these options are installed using the provided
WING NUTS.
Thumb Screw
Replace the BACK PANEL when finished.
for Back Panel
of Monitor
Support
Column

Scope Hooks

Splash Cover

and Bracket
Use the provided WING NUTS to mount the scope
hooks to the column as shown.
Back Panel of Monitor
Support Column

Wireless Access Point Mount

Mount the WIRELESS MOUNTING BRACKET to the
Scope Hooks
column using the provided WING NUTS.
Secure the Cisco Wireless Access Point, or similar,
to the mounting bracket, as shown, by aligning the
Wireless
Mounting
mounting pegs to the bracket.
Bracket
Splash Cover
Mount the splash cover's BRACKET to the MONITOR
SUPPORT COLUMN with the provided WING NUTS.
Secure the SPLASH COVER to the BRACKET.
Hang the transparent, plastic guard, as needed, onto
the posts atop the SPLASH COVER.
14
141299.21 Cisco TelePresence VX Clinical Assistant
TM
CTS-CA2-K9/CTS-CA2-P240V-K9 v1.2 | 2013 JAN | © 2012-2013 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents