Sony SRW-5800 Operation Manual page 135

leading digit(s) is (are) set to zero(s) when you press
the SET button.)
To delete entered data
Press the CLR button.
4
Press the SET button to confirm the input data.
5
Press any of the IN, OUT, AUDIO IN, and AUDIO
OUT buttons.
When the edit point is set, it appears on the editing data
display.
About automatic split edit point setting
Split editing requires a total of eight edit points: four edit
points for video editing (IN and OUT points for both the
recorder and player VTRs) and four edit points for audio
editing (AUDIO IN and OUT points for both the recorder
and player VTRs). However, as soon as you set five edit
points, the VTR automatically sets the remaining three
points. For example, if you set three edit points for video
(or audio) and two for audio (or video), the remaining three
points are automatically set, regardless of whether these
points are for the recorder or player.
In the following example, the points enclosed in a box
have been set manually and the AUDIO OUT point for the
recorder VTR, and the AUDIO IN and OUT points for the
player VTR have been set automatically.
Note that whether set manually or automatically, all edit
points can be changed or deleted at any time.
Recorder VTR
Data entry window
Player VTR
Automatic setting of AUDIO OUT points
When the sixth edit point (AUDIO OUT point) is set, the
edit point data is activated and the invalid AUDIO OUT
points are automatically deleted.
SET is displayed.
Recorder VTR
Player VTR
Automatic setting of edit points by correcting IN
points
When IN points are corrected, the duration in the
uncorrected VTR is used to automatically set OUT points
and AUDIO IN/OUT points.
AUDIO
AUDIO
IN point IN point
OUT point
AUDIO
IN point AUDIO
IN point
OUT point
AUDIO
OUT
AUDIO
IN point
IN point
point
AUDIO
IN point AUDIO
IN point
OUT point
6-1 Basic Automatic Editing
OUT point
OUT point
Sixth edit point set
AUDIO
OUT point
OUT point
OUT point
AUDIO
OUT point
Edit point set
automatically
135