Using A "Memory Stick; Notes On "Memory Stick - Sony SRW-5800 Operation Manual

3-4 Using a "Memory
Stick"
When a "Memory Stick" is inserted in the VTR, the file
data can be stored on the "Memory Stick", which enables
you to share data among VTRs.
Inserting a "Memory Stick"
• When the serial number of this unit is lower than
11001
With the label side up and the connector facing forward,
insert the "Memory Stick" into an optional memory card
adaptor. Then, with the "Memory Stick" still loaded, insert
the memory card adaptor into the memory card slot of the
unit.
Memory card adaptor
Label side up
• When the serial number of this unit is 11001 or
higher
With the label side up and the connector facing forward,
insert the "Memory Stick" into the "Memory Stick" slot.
The access indicator flashes when data is being accessed.
Access indicator
36

3-4 Using a "Memory Stick"

Eject button
"Memory Stick"
"Memory Stick" slot
"Memory Stick"
Label side up
Note
Never insert/remove a "Memory Stick" during access to
data.
To remove a "Memory Stick"
• When the serial number of this unit is lower than
11001
Push the eject button on the memory card adaptor, and pull
the "Memory Stick" out.
• When the serial number of this unit is 11001 or
higher
Push the "Memory Stick" in, and then pull it out.

3-4-1 Notes on "Memory Stick"

Usable type of "Memory Stick"
You can use a "Memory Stick PRO" with this unit. The
"Memory Stick PRO Duo" can also be used, but using the
"Memory Stick PRO Duo" adaptor is required.
The operations of this unit have been checked using
"Memory Stick PRO" media up to 2GB.
Operations checked with:
MSH-128
MSX-512S
MSX-M2GS
Note
When the serial number of this unit is 11001 or higher,
"Memory Stick PRO Duo" adaptor is not required.
Note on data read/write speed
Data read/write speed may vary depending on the
combination of the "Memory Stick" and "Memory Stick"-
compliant product you use.
Before using a "Memory Stick"
Terminal
Write-protect
tab
Labeling position