Items Relating To The Pulldown Control (Nos. A01 To - Sony SRW-5800 Operation Manual

Item number Item
982 DC/FC OUT
SELECT (DUAL
MODE)
983 BORDER
984 BORDER LEVEL
985 BORDER SLOPE
986 BORDER
POSITION

Items Relating to the Pulldown Control (Nos. A01 to ...)

Item number Item
A01 PD TIME CODE
DISPLAY
Setting Function
[MON] Selects DC/FC output for dual-stream playback/recording
LINK-A or double-speed playback.
LINK-B MON: The setting of menu item 981 is applied. The LINK-A
SPLIT (A/B)
SPLIT (B/A)
Field Sequence (A/B)
Field Sequence (B/A)
SIDE by SIDE (A/B)
SIDE by SIDE (B/A) LINK-A: The LINK-A signal is output.
LINK-B: The LINK-B signal is output.
SPLIT (A/B): The monitor display is split vertically in two,
SPLIT (B/A): The monitor display is split vertically in two,
Field Sequence (A/B): The LINK-A signal is output to field
Field Sequence (B/A): The LINK-B signal is output to field 1
SIDE by SIDE (A/B): The screen is split into two sides with
SIDE by SIDE (B/A): The screen is split into two sides with
Note
The Field Sequence and SIDE by SIDE settings are
enabled only during dual-stream (3D) mode. For double-
speed playback, the LINK-A signal (the signal input from
the HD SDI INPUT A connector) is output to fields 1 and 2.
[off] When the monitor display is split during dual-stream
on playback/recording or double-speed playback, this item
specifies whether or not a dividing line is displayed.
off: A dividing line is not displayed.
on: A dividing line is displayed.
1 to [8] to 127 When the monitor display is split during dual-stream
playback/recording or double-speed playback, this item
specifies the brightness of the dividing line.
off When the monitor display is split during dual-stream
[on] playback/recording or double-speed playback, this item
specifies whether or not the dividing line is sloped.
off: The dividing line is not sloped.
on: The dividing line is sloped.
–480 to [0] to 480
When the monitor display is split during dual-stream
playback/recording or double-speed playback, this item
specifies the position of the dividing line.
Setting Function
[off]
Sets whether or not to display the pulldown time code on
on the time code display area.
off: Does not display the pulldown time code.
on: Displays the pulldown time code.
signal (the signal input from the HD SDI INPUT A
connector) is output when "LINK-A/B" is selected in
menu item 981, and the LINK-B signal (the signal input
from the HD SDI INPUT B connector) is output when
"LINK-B/A" is selected.
with the LINK-A signal output to the left of the monitor
display and the LINK-B signal output to the right.
with the LINK-B signal output to the left of the monitor
display and the LINK-A signal output to the right.
1 and the LINK-B signal is output to field 2.
and the LINK-A signal is output to field 2.
the LINK-A signal image on the left side reduced to 1/2
size in the horizontal direction, and the LINK-B signal
image on the right side reduced to 1/2 size in the
horizontal direction.
the LINK-B signal image on the left side reduced to 1/2
size in the horizontal direction, and the LINK-A signal
image on the right side reduced to 1/2 size in the
horizontal direction.
191
Menu List