Sony SRW-5800 Operation Manual page 164

Item number Item
127 Tele-File IN OUT
Input Continue
128 Tele-File Real Date/
Real Time Mode
129 STOP CODE
FUNCTION
Sub items
DETECT BEEP
DETECT STOP
STOP ADJUST
REC ADJUST
130 S-LCD DIMMER
131 CHANGED MENU
HIGHLIGHT
Sub items
ITEM SETTING
DEFAULT
SETTING
132 KNOB MODE
133 AUDIO INPUT
SOURCE DISPLAY
(Appears only when
the serial number of
this unit is 12001 or
higher.)
164
Menu List
Setting Function
on Specifies whether or not to input the log data (IN and OUT
[off]
on: The log data (IN and OUT points) can be input
off: The log data (IN and OUT points) cannot be input
[without]
When recording Tele-File data, select whether to record the
with real date/time.
without: Do not record real date/time.
with: Record real date/time.
Stop code detection mode and adjustment of stop position
when a stop code is detected.
on on: When a stop code is detected, sound a beeper.
[off]
off: When a stop code is detected, do not sound a beeper.
on on: When a stop code is detected, stop the tape. ("D-
[off]
off: When a stop code is detected, do not stop the tape.
150 fr When a stop code is detected, adjust the tape stop position
[0 fr] from the normal stop position in the direction of the SOM
point (program start point), in the range 0 to 150 frames.
5sec Specifies how many seconds before the SOM point to start
4sec recording a stop code.
[3sec]
2sec
1sec
16 to [11] to 0 Adjusts the information display luminance.
Changes the display color of items whose setting has been
changed.
[off] off: Changed menu setting values do not change display
on
on: Changed menu setting values are displayed in yellow.
[off]
off: Menu numbers with changed DEFAULT values do not
on
on: Menu numbers with changed DEFAULT values are
[set default]
Selects the behavior of the unit when the MULTI CONTROL
move window knob is pressed during VTR SETUP menu operations.
set default: When a setting value is being selected, selects
move window: Move between the item window and the
[off] When the sampling frequency specified by item 842 is
on "96K", determines whether or not to display the selected
audio input signal on the audio level meter.
off: Selected audio input signals are not displayed.
on: Selected audio input signals are displayed.
points) continuously in the Tele-File menu.
continuously.
continuously.
STOP" appears in the information display.)
color.
change display color.
displayed in yellow.
the default value.
window for changing values.