Sony SRW-5800 Operation Manual page 193

Item number Item
A07 PD CHARACTER
24F TIME CODE
MODE
A08 FC REFERENCE
select
A10 9-Pin TC sense
select
A20 Black Clip for 444-
to-422 Conversion
A21 CONVERTER
MODE (FC)
A22 H CROP POSITION
(FC)
(Appears only when
this unit is SRW-
5800/2 and the
HKSR-5001 is
installed whose
serial number is
15001 or higher.)
Setting Function
[off] When item 620 and A03 is set to "on", specifies whether or
on not the 2 : 3 pulldown 24-frame time data is inserted to the
first line instead of 30-frame time data.
off: 30-frame time data is displayed.
on: 24-frame time data is displayed.
Note
The setting of this item is effective only when the operation
mode of this unit is set to 23.98PsF or 24PsF.
extrn HD Selects the signal to be the reference for the FORMAT
[extrn SD]
CONV. OUT input to the REF. INPUT 2 connector.
extrn HD: Use the HD tri-level reference signal input to the
extrn SD: Use the SD reference signal input to the REF.
[LINE]
Specifies whether or not the time code information of FC
FC output signal is returned when time code sense command
is input through the 9-pin connector.
LINE: Time code information of main output signal is
FC: Time code information of FC output signal is returned.
Notes
• Pulldown output signal and 30-frame/sec time code are
• When editing pulldown output signals with a VTR
[on]
When a 4:4:4 signal is converted to a 4:2:2 signal, this item
off specifies whether the signal that goes below the black level
(040H) is suppressed or not.
on: Signals that drop below the black level are suppressed.
off: Signals that drop below the black level are not
[EDGE-CROP] Selects the mode for converting from 2K signal to HD
LETTER BOX signal for FC output.
SQUEEZE EDGE-CROP: Selects edge crop mode.
LETTER BOX: Selects letter box mode.
SQUEEZE: Selects squeeze mode.
–64 When "EDGE-CROP" is selected in menu item A21,
adjusts the H crop (horizontal direction of portion cut out in
edge crop mode) for FC output.
[0]
64
REF. INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
returned. In pulldown conversion mode, 24-frame/sec
time code information is returned.
In pulldown conversion mode, 30-frame/sec time code
is returned.
synchronized only when this unit is set to PLAY LOCK
mode. To synchronize the signals, set item A05 "PD EXT
SD REF LOCK MODE" to "lock2".
operating in 30F mode, it may not be possible to achieve
sync within 5 seconds. If this occurs, set the preroll time
to 7 seconds.
Also, normal operation is not possible with devices
engaged in player sync.
suppressed.
193
Menu List