Security Command Command Processor XR6 User Manual page 19

User Codes
continued
User Code Authority Levels
Sytem Options Standard
Arm and Disarm
User Checkin
Sensor Reset
Outputs On/Off
Bypass Zones
Zone Monitor
System Test
User Codes
Display Events
Service Request
Adding User Code Numbers:
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any one of the SELECT keys. The keypad displays
ADD DEL CHG.
4. Press the SELECT key under ADD to add a new user code. You
must have a Master user code level to be able to add a user code
to the system.
5. At the USER NUMBER:
press COMMAND. The displays changes to CODE NO:
6. Enter a user code number of 4 digits and press COMMAND. This
is the number they will use each time they arm, disarm, or make
changes to the system.
User Menu
Master
- prompt, enter a user number and
7. The display changes to MASTER? NO YES. Select YES to
make this a Master code level with the authority to Add, Delete,
and Change user code information.
Selecting NO displays TEMP CODE NO YES.
Master code levels do not display TEMP CODE.
• NO makes this a permanent user code with Standard authority.
• YES makes this a temporary code with Standard authority that
automatically expires in 7 days. Temporary codes are perfect for
guests or service technicians. You can delete a Temporary user
code at any time before the 7 days expires.
8. After making your selection, the display shows USER # ADDED.
9. Press the ARROW key once to add another user or twice to exit
from the User Menu.
Deleting User Code Numbers:
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any one of the SELECT keys. The keypad displays
ADD DEL CHG.
4. Press the SELECT key under DEL to delete a user code from the
system. You must have a Master user code level to be able to
delete a user code.
5. At the USER NUMBER:
want to delete and press COMMAND. The displays changes to
USER # DELETED.
.
6. The display then changes back to USER NUMBER:
to delete another user. Press the ARROW key twice to exit the
User Menu.
- prompt, enter the user number you
- for you
15