Pnp/Pci Configurations - Advantech POD-6552 A2 User Manual

Resume by Alarm
This item allows the user to enable and key in the date and time to power on the
system
Disabled
Enabled
Day (of month)
Time (HH:MM:SS)
3.2.7

PnP/PCI Configurations

Note! The "PnP/PCI Configurations" screen sets up the IRQ and DMA (both
PnP and PCI bus assignments).
Reset Configuration Data
This item allows the user to clear any PnP configuration data stored in the
BIOS.
Resources Controlled By
– IRQ Resources
This item allows you respectively assign an interrupt type for IRQ-3, 4, 5, 7,
9, 10, 11, 12, 14, and 15.
– DMA Resources
This item allows you respectively assign an interrupt type for DMA-0, 1, 2, 3,
4, 5, 6, and 7.
PCI VGA Palette Snoop
The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.
POD-6552 A2 User Manual
[Disabled]
Disable this function.
Enable alarm function to power on system
Alarm 1-31
Alarm (0-23) : (0-59) : 0-59)
[Disabled]
[Auto (ESCD)]
[Disabled]
30