Advantech POD-6552 A2 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. POD-6552 A2
  6. User manual
Advantech POD-6552 A2 User Manual

Advantech POD-6552 A2 User Manual

Motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
POD-6552 A2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POD-6552 A2 and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech POD-6552 A2

Summary of Contents for Advantech POD-6552 A2

  • Page 1 User Manual POD-6552 A2...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 ADVANTECH Repair Service Department. For those products which are not DOA, the return fee to an authorized ADVANTECH repair facility will be at the customers’ expense. The shipping fee for reconstructive products from ADVANTECH back to customers’ sites will be at ADVANTECH’s expense.

  • Page 4: Declaration Of Conformity

    Discard used batteries according to the manufacturer’s instructions. Technical Support and Assistance For more information about this and other Advantech products, please visit our web- site at: http://www.advantech.com/ http://www.advantech.com/ePlatform/ For technical support and service, please visit our support website at: http://support.advantech.com.tw/support/...

  • Page 5: Packing List

    Packing List Before installation, please ensure the following items have been shipped: 1 POD-6552 A2 SBC 1 Startup manual 1 Utility CD 1 Power Cable 12P/Big 4Px2, 10 cm 1700006196 1 mini jumper pack 9689000002 Ordering information Model Number Description...
  • Page 6 POD-6552 A2 User Manual...

  • Page 7: Table Of Contents

    Frequency/Voltage Control ............32 3.2.10 Load Optimized Defaults............. 33 3.2.11 Set Password................33 3.2.12 Save & Exit Setup ............... 35 3.2.13 Quit Without Saving ..............35 Chapter S/W Introduction & Installation ..37 S/W Introduction..................38 Driver Installation ................... 38 POD-6552 A2 User Manual...
  • Page 8 A.21 DIMM1: DDR SODIMM Socket............... 70 A.22 PCI1/2: PCI Connector ................70 Appendix B Optional Extras for the POD-6552 ... 71 PCM-10586-6552E Cable kit for POD-6552 A2........72 Appendix C Watchdog Timer........ 73 Watchdog Timer..................74 Appendix D System Assignment......77 System I/O Ports..................
  • Page 9 Appendix E Electrical Specifications ....81 Input Power ..................... 82 E.1.1 Power Supply Selection .............. 82 E.1.2 Power Requirement of Power Supply ......... 82 E.1.3 Rising Time ................. 82 POD-6552 A2 User Manual...
  • Page 10 POD-6552 A2 User Manual...

  • Page 11: Chapter 1 General Introduction

    Chapter General Introduction This chapter gives background information on POD-6552 A2. Sections include: Introduction Specifications...

  • Page 12: Introduction

    Supports up to 266 MHz DDR SODIMM Supports six USB 2.0 ports Product Specifications POD-6552 A2 is reversion from A1. For system I/O ports, PCM-6552 A2 add Super IO runtime register and change COM2 address from 2F8 ~ 2FF to 2E0~2E7. The list is as follow.

  • Page 13: Ethernet

    North Bridge Controller Hub Intel® 852GM chipset 400MHz for 852GM Display VGA port (1600 x 1200 @ 24bpp 85Hz) 18-bit TTL TV-OUT LVDS (18/36 bit) Memory 200/266 MHz (No ECC) 200 Pin SODIMM SOCKET(Up to 1GB) POD-6552 A2 User Manual...
  • Page 14 6 USB 2.0 ports, 480 MB/s 2 Ultra ATA (100/66/33 MB/s),Independent timing of up to 4 drives Power Management, ACPI 2.0 compliant FWH interface to Flash BIOS Supports AC’97 2.3 00 Mbit/sec Ethernet support IEEE 802.3 compliant 10/1 POD-6552 A2 User Manual...

  • Page 15: Mechanical Specifications

    203 mm (L) * 146 mm (W) (8" x 5.75") 1.3.2.2 Height on Top (mm) On board type: 30.5 mm (CPU Heatsink) Socket type: 30.2 mm (D-SUB COM) 1.3.2.3 Height on Bottom (mm) 5.3 mm (SO-DIMM) POD-6552 A2 User Manual...

  • Page 16: Electrical Specifications

    512MB*1/533MHz 1GB*1/533MHz BIOS Picture 1.49A 0.23A 2.93A 0.66A DOS Idle 1.25A 0.41A 2.67A 0.61A Intel® Celeronl® M Win Idle 3.33A 0.89A 1.55A 0.44A 1 GHz Win HCT11.2 2.91A 0.31A 2.89A 0.36A 3DMark2001 3.51A 0.18A 3.06A 0.52A POD-6552 A2 User Manual...
  • Page 17 2.21A 0.61A 0.76A 1.66A 0.26A 0.47A 1.68A 0.64A Intel® Celeron® M 1 GHz Win Idle 0.91A 2.31A 0.35A 0.71A 2.26A 0.21A Win HCT11.2 0.59A 2.98A 0.28A 0.43A 2.92A 0.62A 3DMark2001 0.79A 3.06A 0.64A 0.52A 2.97A 0.76A POD-6552 A2 User Manual...

  • Page 18: Environmental Specifications

    Standard products (0 ~ 60° C) Relative humidity: 95% @ 60° C Phoenix products (-20 ~ 80° C) Relative humidity: 95% @ 60° C Platinum Phoenix products (-40 ~ 85° C) Relative humidity: 95% @ 60° C POD-6552 A2 User Manual...

  • Page 19: Chapter 2 H/W Installation

    Chapter H/W Installation This chapter explains the setup procedures of the POD-6552 hardware, including instructions on setting jumpers and connect- ing peripherals, switches, indica- tors and mechanical drawings. Be sure to read all safety precau- tions before you begin the instal- lation procedure.

  • Page 20: Jumpers

    PIN HEADER 4*1P 180D (M) 2.0 mm DIP WO/Pb Setting Function J2(1) ~ J3(1) J2(2) ~ J3(2) RS232 J2(3) ~ J3(3) J2(4) ~ J3(4) J3(1) ~ J4(1) J3(2) ~ J4(2) RS422 / RS485 J3(3) ~ J4(3) J3(4) ~ J4(4) POD-6552 A2 User Manual...
  • Page 21 PIN HEADER 2*1P 180D (M) SQUARE 2.0 mm DIP W/O Pb Setting Function (1-2) Clear CMOS AT / ATX Select Part Number 1653003101 Footprint JH3X1V-2M Description PIN HEADER 3*1P 180D (M) 2.0 mm DIP SQUARE WO/Pb Setting Function (1-2) ATX Power (2-3) AT Power POD-6552 A2 User Manual...

  • Page 22: Jumper Description

    Warning! To avoid damaging the computer, always turn off the power supply before setting jumpers to clear CMOS. Before turning on the power sup- ply, set the jumper back to 3.0 V Battery On. POD-6552 A2 User Manual...

  • Page 23: Connectors

    The board provides up to 6* USB (Universal Serial Bus) ports. This gives complete Plug and Play, and hot attach/detach for up to 127 external devices. The USB inter- faces comply with USB specification Rev. 2.0 which supports 480Mbps transfer rate, and are fuse protected. POD-6552 A2 User Manual...
  • Page 24 CN17 is a 40-pin connector for TTL LCD or DSTN. It could connect TTL LCD or DSTN freely to meet your need. 2.2.2.11 PC-104 connector (CN18) POD-6552 supports a PC-104 connector. It is intended for industrial embedded com- puting environments where applications depend on reliable data acquisition. POD-6552 A2 User Manual...
  • Page 25 26-pin flat-cable. The parallel port is designated as LPT1, and can be disabled or changed to LPT2 or LPT3 in the system BIOS setup. The parallel port interrupt channel is designated to be IRQ7. You can select ECP/EPP DMA channel via BIOS setup. POD-6552 A2 User Manual...

  • Page 26: Mechanical

    TV-Out USB1/2 MS/KB COM1/2 VGA D-SUB CN15 CN14 CN17 CN13 CN11 CN12 CN10 CN16 FAN1 CN19 PCI2 PCI1 CN18 CN20 CN21 FAN2 CN26 CN22 CN24 CN28 CN25 CN27 Figure 2.1 Jumper and Connector Layout (Component Side) POD-6552 A2 User Manual...

  • Page 27: Figure 2.2 Jumper And Connector Layout (Solder Side)

    SO-DIMM Figure 2.2 Jumper and Connector Layout (Solder Side) POD-6552 A2 User Manual...

  • Page 28: Board Dimension

    83.31 [3.280] 84.20 [3.315] 107.82 [4.245] 110.36 [4.345] 115.44 [4.545] 135.89 [5.350] 135.89 [5.350] 140.21 [5.520] Figure 2.3 Board Dimension Layout (Component Side) 13.46 [0.530] 95.09 [3.744] 135.89 [5.350] Figure 2.4 Board Dimension Layout (Solder Side) POD-6552 A2 User Manual...

  • Page 29: Chapter 3 Bios Operation

    Chapter BIOS Operation Sections include: BIOS Introduction BIOS Setup...

  • Page 30: Bios Introduction

    CPUs from 386 through Pentium, AMD Geode, K7 and K8 (including multiple proces- sor platforms), and VIA Eden C3 and C7 CPUs. You can use Advantech’s utilities to select and install features that suit your needs and your customers’ needs.

  • Page 31: Main Menu

    This selection loads optimized values for best system performance configura- tion. Set Password Establish, change or disable passwords. Save & Exit Setup Save CMOS value settings to CMOS and exit BIOS setup. Exit Without Saving Abandon all CMOS value changes and exit BIOS setup. POD-6552 A2 User Manual...

  • Page 32: Standard Cmos Features

    The system boot process will not stop for a diskette error, but will stop for all other errors. All, But Disk/Key The system boot process will not stop for a keyboard or disk error, but will stop for all other errors. POD-6552 A2 User Manual...

  • Page 33: Advanced Bios Features

    USB-CDROM Sets boot priority for USB-CDROM. Sets boot priority for LAN. Disabled Disables this boot function. Swap Floppy Drive [Disabled] This item enables users to swap floppy “A” and “B” identified without change hardware cable connection. POD-6552 A2 User Manual...
  • Page 34 This item sets the operating system multiprocessor support version. OS Select For DRAM > 64 MB [Non-OS2] Select OS2 only if the system is running the OS/2 operating system with greater than 64 MB of RAM on the system. POD-6552 A2 User Manual...

  • Page 35: Advanced Chipset Features

    This item allows the system BIOS to be cached to allow faster execution and better performance. Video BIOS Cacheable [Disabled] This item allows the video BIOS to be cached to allow faster execution and bet- ter performance. POD-6552 A2 User Manual...
  • Page 36 This item allows the user to adjust the memory buffer for on-chip graphics. Boot Display [VBIOS Default] This item allows the user to decide which display mode to use for the boot dis- play. Panel Type [640 x 480] This item allows the user to adjust panel resolution. POD-6552 A2 User Manual...

  • Page 37: Integrated Peripherals

    This item enables users to set the Super IO device status, including Floppy, COM, LPT, IR and to control GPIO and Power fail status. Onboard Serial port 1 [3F8] This item allows the user to adjust serial port 1 address. POD-6552 A2 User Manual...

  • Page 38: Power Management Setup

    ACPI Function [Enabled] This item defines the ACPI (Advanced Configuration and Power Management) feature that makes hardware status information available to the operating sys- tem, and communicates to PC and system devices for improved power man- agement. POD-6552 A2 User Manual...
  • Page 39 This item allows the user to enable and define how LAN wake the system up from suspend mode. Power On by Ring [Enabled] This item allows the user to enable and define how the system will resume by activation of the modem ring. POD-6552 A2 User Manual...

  • Page 40: Pnp/Pci Configurations

    This item allows you respectively assign an interrupt type for DMA-0, 1, 2, 3, 4, 5, 6, and 7. PCI VGA Palette Snoop [Disabled] The item is designed to solve problems caused by some non-standard VGA cards. A built-in VGA system does not need this function. POD-6552 A2 User Manual...

  • Page 41: Pc Health Status

    This item displays current CPU/System temperature. FAN 1 / FAN2 Speed [Show Only] This item displays current system FAN(s) speed(s). 3.3 V/ 1.05 V/2.5 V/ 5 V/ 12 V [Show Only] This item displays current CPU and system voltage. POD-6552 A2 User Manual...

  • Page 42: Frequency/Voltage Control

    Spread Spectrum [Disabled] This item enables users to set the spread spectrum modulation. CPU Host/SRC/PCI Clock [Default] This item enables users to set the CPU Host and PCI clock by system auto- matic detection or by manual POD-6552 A2 User Manual...

  • Page 43: Load Optimized Defaults

    Setup, depending on which aspects you want password protected. Sys- tem requires a password both to boot the system and to enter Setup. Setup requires a password only to enter Setup. A password may be at most 8 characters long. POD-6552 A2 User Manual...
  • Page 44 Select Set Password again, and at the Enter Password prompt, DO NOT enter anything - just press <Enter>. At the Confirm Password prompt, again, DO NOT type in anything - just press <Enter>. Select Save to CMOS and exit, type <Y>, then <Enter>. POD-6552 A2 User Manual...

  • Page 45: Save & Exit Setup

    CMOS. Typing <N> will return to BIOS Setup. 3.2.13 Quit Without Saving Note! Typing <Y> will quit the BIOS Setup Utility without saving any changes to CMOS. Typing <N> will return to the BIOS Setup Utility. POD-6552 A2 User Manual...
  • Page 46 POD-6552 A2 User Manual...

  • Page 47: Chapter 4 S/W Introduction & Installation

    Chapter S/W Introduction & Installation...

  • Page 48: S/W Introduction

    S/W Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (Hardware suppliers, System integrators, Embedded OS distributor) for projects.

  • Page 49: Susi Functions

    SUSI provides a consistent programming interface for different Advantech boards. That means user programs using SUSI are portable among different Advantech boards as long as the boards and SUSI provide the required functionalities. Overall product development times can be greatly reduced using SUSI.
  • Page 50 Windows CE In windows CE, there are three ways to install the SUSI Library, you can install it manually or use Advantech CE-Builder to install the library or just copy the programs and the library onto a compact flash card.

  • Page 51: Susi Sample Programs

    Visual C++ 6.0 on Windows XP or under Microsoft Embedded Visual C++ 4.0 on Windows CE. Developers must add the header file Susi.h and library Susi.lib to their own projects when they want to develop something with SUSI. POD-6552 A2 User Manual...
  • Page 52 For a complete support list, please refer to Appendix A. We describe the steps to test all functions of this application. POD-6552 A2 User Manual...
  • Page 53 Key in the pin numbers you want to write. Pin numbers start from '0'. – Key in the value either '0' or '1' in (R/W) Result field to write the output pin you chose above step. – Click the WRITE GPIO DATA button to write the GPIO output pin. POD-6552 A2 User Manual...
  • Page 54 Key in the register offset in Register Offset field. – Key in the desirous of data in Result field to write to the device. – Click the WRITE A BYTE button and then the data will be written to the device through I POD-6552 A2 User Manual...
  • Page 55 Key in the slave device address in the Slave address field. – Key in the register offset in the Register Offset field. – Click the READ SMBus DATA button and then a word of data from the device will be shown on the Result field. POD-6552 A2 User Manual...
  • Page 56 Key in all the desired data in the Result field in hexadecimal format, divided by commas, for example, 0x50,0x60,0x7A. – Click the WRITE SMBus DATA button and all of the data will be written to the device through the SMBus. POD-6552 A2 User Manual...
  • Page 57 Move the slider in increments, using either the mouse or the direction keys, or click the UP button to increase the brightness. – Move the slider in decrements, using either the mouse or the direction keys, or click the DOWN button to decrease the brightness. POD-6552 A2 User Manual...
  • Page 58 Before the timer counts down to zero, you can reset the timer by clicking the REFRESH button. After you click this button, the Timeout Countdown field will display the value of the SET TIMEOUT field. If you want to stop the watchdog timer, you just click the STOP button. POD-6552 A2 User Manual...
  • Page 59 When the Monitor application is executed by clicking the button, hardware monitoring data values will be displayed. If certain data values are not supported by the platform, the correspondent data field will be grayed-out with a value of 0. POD-6552 A2 User Manual...
  • Page 60 POD-6552 A2 User Manual...

  • Page 61: Extension I/O Installation

    Chapter Extension I/O Installation...

  • Page 62: Pc-104

    PCI Riser Card PCI Card Aim the pin to the footprint and apply force evenly Backplane After apply force to the PCI card, the footprint of PCI card need to be inserted correctly. POD-6552 A2 User Manual...

  • Page 63: Appendix A Pin Assignments

    Appendix Pin Assignments...

  • Page 64: Cn2: Com Port 1/2 D-Sub Connector

    CN2: COM port 1/2 D-Sub Connector COM port 1/2 Connector Part Number 1654409101 Footprint DB9D-VM7MX2 Description D-SUB Conn. 18P DUAL PORT 90D(M) DIP RS232 RS232 RS422 RS485 TXD- DATA- SINA SINA TXD+ DATA+ SOUT SOUT RXD+ RXD- POD-6552 A2 User Manual...

  • Page 65: Cn7: Vga Connecter

    CN7: VGA Connecter VAG Connector Part Number 1653208260 Footprint BH8X2SV Description Box HEADER 8*2P 180D (M) 2.00 mm Pin Name Signal Type Signal Level DAC_L_R VCC_5V_CRT DAC_L_G DAC_L_B CRTDDC_L_D DAC_L_HSYNC DAC_L_VSYNC CRTDDC_L_C VGA_ALW POD-6552 A2 User Manual...

  • Page 66: Cn8: Audio Connecter

    BOX HEADER 8*2P 180D (M) 2.00 mm Pin Name Signal Type Signal Level Speaker Out R+ Speaker Out R- Speaker Out L+ Speaker Out L- HPOUTR HPOUTL AGND AGND Line In Right Line In Left AGND AGND MIC2 In MIC1 In AGND POD-6552 A2 User Manual...

  • Page 67: Cn9: Com3/4 Connecter

    1653210260 Footprint BH10X2SV Description BOX HEADER 10*2P 180D (M) 2.0 mm SMD W/O Pb Pin Name Signal Type Signal Level DCDC# DSRC# SINC RTSC# SOUTC CTSC# DTRC# RIC# DCDD# DSRD# SIND RTSD# SOUTD CTSD# DTRD# RID# POD-6552 A2 User Manual...

  • Page 68: Cn10: Irda Connecter

    VCC_5V_SIR IRRX IRTX CN11: USB4/5 Connector CN11 USB4/5 Connector Part Number 1653205261 Footprint HD_5x2P_79_BOX_N10 Description PIN HEADER 5x2P 180D (M) 2.0 mm SMD IDIOT-PROOF Pin Name Signal Type Signal Level VCC5_USB45 VCC5_USB45 C_USB_PN4 C_USB_PN5 C_USB_PP4 C_USB_PP5 POD-6552 A2 User Manual...

  • Page 69: Cn12: Usb2/3 Connector

    Signal Type Signal Level VCC5_USB23 VCC5_USB23 C_USB_PN2 C_USB_PN3 C_USB_PP2 C_USB_PP3 CN13: PS2 Connecter CN13 PS2 Connecter Part Number 1655306020 Footprint WHL6V-2M Description WAFER BOX 2.0 mm 6P 180D (M) W/LOCK Pin Name Signal Type Signal Level KBVCC POD-6552 A2 User Manual...

  • Page 70: Cn14: Lvds Connecter

    1653910261 Footprint SPH20X2A Description *CONN. SMD 10*2P 180D (M) DF13-20DP-1.25V Pin Name Signal Type Signal Level VCC_LCD +5V/+3.3V VCC_LCD +5V/+3.3V LVDS0_N0 LVDS LVDS0_P0 LVDS LVDS0_N1 LVDS LVDS0_P1 LVDS LVDS0_N2 LVDS LVDS0_P2 LVDS LVDS0_C0N LVDS0_C0P LVDS0_N3 LVDS1_N2 POD-6552 A2 User Manual...

  • Page 71: Cn15: Inverter Connecter

    +3.3V VCC_5V_L A.11 CN16: CD in Connecter CN16 CD In Connecter Part Number 1655304020 Footprint WF_4P_79_BOX_R1_D Description WAFER BOX 2.0 mm 4P 180D (M) W/LOCK A2001WV2-4P Pin Name Signal Type Signal Level CD_R CDGND CDGND CD_L POD-6552 A2 User Manual...

  • Page 72: Cn17: Ttl Connecter

    A.12 CN17: TTL Connecter CN17 TTL Connecter Part Number 1653920200 Footprint SPH20X2 Description CONN. 20*2P 90D 1.25Mmm SMD WO/PB DF13-40DP-1.25V HRS Pin Name Signal Type Signal Level VCC_LCD +5V/+3.3V VCC_LCD +5V/+3.3V VCC_LCD +5V/+3.3V VCC_LCD +5V/+3.3V DSTN_Vcon POD-6552 A2 User Manual...
  • Page 73 LD10 UD10 LD11 UD11 SHCLK M/DE LOAD ENVEE POD-6552 A2 User Manual...

  • Page 74: Cn20: Power Connecter

    Signal Level +5VSB PSON# +3.3V +12V +12V A.14 CN21: -V5 and -V12 Connecter CN21 -5V&-12V Connecter Part Number 1655303020 Footprint WHL3V-2M Description WAFER BOX 2.0mm 3P 180D w/LOCK Pin Name Signal Type Signal Level VCC5N V12N -12V POD-6552 A2 User Manual...

  • Page 75: Cn26: Panel Connector

    HDD LED and POWER LED Part Number 1653007260 Footprint BH7X2SV Description PIN HEADER SMD 2*7P 180D (M) P=2.0 mm Pin Name Signal Type Signal Level HDLEDA# HDD_LEDC# LED_POWER SUSLED LEDP_ACT 3.3V ACTLED LEDP_LNK 3.3V LINKLED FP_PSIN 3.3V MASTER_RESET# POD-6552 A2 User Manual...

  • Page 76: Cn28: Lpt Connecter

    Part Number 1653213204 Footprint BH13X2DV-2M Description BOX HEADER 13*2P 180D (M) 2.0 mm DIP WO/PB Pin Name (LPT) Signal Level PPT_STB# PPT_AFD# PPT_PD0 PPT_ERR# PPT_PD1 PPT_INIT# PPT_PD2 PPT_SLIN# PPT_PD3 PPT_PD4 PPT_PD5 PPT_PD6 PPT_PD7 PPT_ACK# PPT_BUSY PPT_PE PPT_SLCT POD-6552 A2 User Manual...

  • Page 77: Fan1/2: Fan Connector

    Signal Type Signal Level FAN_DET VCC_FAN A.18 CN24/25: IDE Connecter CN24/25 IDE Connecter Part Number 1653222262 Footprint BH22X2SV Description BOX HEADER SMD 22*2P 180D (M) 2.00 mm IDIOT-PROOF Pin Name Signal Type Signal Level RESET# +3.3V DD10 POD-6552 A2 User Manual...

  • Page 78: Cn18: Pc104 Connecter

    DD11 DD12 DD13 DD14 DD15 DMARQ DIOW# DIOR# IORDY CSEL DMACK# INTRQ PDIAG# CS#1 CS#3 DASP# VCC5 VCC5 A.19 CN18: PC104 Connecter CN18 PC-104 Connector Part Number 165313222A, 165312022A Footprint PCI-PLUS Description PCB SKT 32*2 180D(F)H=11.54 POD-6552 A2 User Manual...

  • Page 79: Cn22: Cf Typeii Connecter

    COMPACK-T12 Description CF 50P 90D(M)SMD TypeII N7E50-H516CES70004-DY Pin Name Signal Type Signal Level IDE_SDD3 IDE_SDD4 IDE_SDD5 IDE_SDD6 IDE_SDD7 IDE_SDCS#1 IDE_SDA2 IDE_SDA1 IDE_SDA0 IDE_SDD0 IDE_SDD1 IDE_SDD2 IDE_SDD11 IDE_SDD12 IDE_SDD13 IDE_SDD14 IDE_SDD15 IDE_SDCS#3 IDE_SDIOR# IDE_SDIOW# IDE_WE# IDE_IRQ CF_CSEL# POD-6552 A2 User Manual...

  • Page 80: Dimm1: Ddr Sodimm Socket

    DDR SODIMM Socket Part Number 16515A0995 Footprint DDR-SODIMM-STD65 Description SKT DIMM 200P DDR 0.6 mm H=5.2 mm SMD WO/Pb A.22 PCI1/2: PCI Connector PCI1/2 PCI Connector Part Number 16542C0200 Footprint PCI-SL Description SLOT 60*2P 180D (F) DIP WO/Pb POD-6552 A2 User Manual...

  • Page 81: Appendix B Optional Extras For The Pod-6552

    Appendix Optional Extras for the POD-6552...

  • Page 82: Pcm-10586-6552E Cable Kit For Pod-6552 A2

    The POD-6552 requires several cables for normal operation. You can make them yourself or purchase an optional cable kit assembly, which includes the following. PCM-10586-6552E Cable kit for POD-6552 A2 POD-6552 Part No. Cable Description Terminating Connector Connector 1700000101 USB Cable CN11, 12 10P 2.0 mm/USB 60 cm...

  • Page 83: Appendix C Watchdog Timer

    Appendix Watchdog Timer...

  • Page 84: Watchdog Timer

    ;bit [1:0]=Reserved ;bit [6:2]Reserve=00000 ;bit [7] WDT time-out Value Units Select ;Minutes=0 (default) Seconds=1 ;==================================================== mov dx,SCH3114_IO + 65h ; mov al,080h out dx,al ;==================================================== ;66H ;WDT timer time-out value ;bit[7:0]=0~255 ;==================================================== mov dx,SCH3114_IO + 66h POD-6552 A2 User Manual...
  • Page 85 ;==================================================== ;bit[0] status bit R/W ;WD timeout occurred =1 ;WD timer counting = 0 ;==================================================== mov dx,SCH3114_IO + 68h mov al,01h out dx,al .exit POD-6552 A2 User Manual...
  • Page 86 POD-6552 A2 User Manual...

  • Page 87: Appendix D System Assignment

    Appendix System Assignment...

  • Page 88: System I/O Ports

    Parallel Port(standard & AFF) 3C0-3CF 3D0-2DF 3E8-3EF COM3 3F0-2F7 Floppy Controller 3F8-3FF COM1 778-77A Parallel Port(ECP Extensions)(Port 378+400) 870-871 Hardware Monitor 800h-87Fh Super IO runtime register CF8-CFB PCI Configuration Address CFC-CFF PCI Configuration Data D00-FFFF -available for system use- POD-6552 A2 User Manual...

  • Page 89: 1St Mb Memory Map

    B0000h-B7FFFH Unused A0000h-AFFFFh EGA/VGA graphics 00000h-9FFFFh Base memory DMA channel assignments Table D.3: DMA channel assignments Channel Function Available Available (audio) Floppy disk (8-bit transfer) Available (parallel port) Cascade for DMA controller 1 Available Available Available POD-6552 A2 User Manual...

  • Page 90: Interrupt Assignments

    Interrupt from controller 2 (cascade) IRQ3 COM2 IRQ4 COM1 IRQ5 COM4 IRQ6 IRQ7 LPT1 IRQ8 IRQ9 Reserved(audio) IRQ10 COM3 IRQ11 Reserved for watchdog timer IRQ12 PS/2 Mouse IRQ13 INT from Co-processor IRQ14 Primary IDE IRQ15 Secondary IDE for CFC POD-6552 A2 User Manual...
  • Page 91 Appendix Electrical Specifications...

  • Page 92: Input Power

    = CPU board + peripheral (USB) + system device (IDE, SATA HD) + add on card. E.1.3 Rising Time ATX: Power Rising Time (T=0.1 mS ~ 20 mS) AT: Power Rising Time (T=5 mS ~ 15 mS) POD-6552 A2 User Manual...
  • Page 93 POD-6552 A2 User Manual...
  • Page 94 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2009...

This manual is also suitable for:

Pod-6552l-00a2ePod-6552l-m0a2ePod-6552l-s0a2e

Table of Contents