Technical Specification - Alto LYNX-MIX244 User Manual

2

8. TECHNICAL SPECIFICATION

Mono Input Channels
Electronically balanced, discrete input configuration
Microphone Input
Frequency Response
10 Hz to 55 kHz, +/-3 dB
Distortion (THD & N) 0.005% at + 4 dBu, 1 kHz
Gain Range 0 dB to 50 dB (MIC)
SNR (Signal to Noise Ratio)
115 dB
Line Input Electronically balanced
Frequency Response 10 Hz to 55 kHz, +/-3 dB
Distortion (THD & N) 0.005% at +4 dBu, 1 kHz
Sensitivity Range +15 dBu to -35 dBu
Stereo Input Channels
Line Input Balanced/Unbalanced
Frequency Response 10 Hz to 55 kHz, +/-3 dB
Distortion (THD & N) 0.005% at +4 dBu, 1 kHz
Impedances
Microphone Input
1.4 kOhm
Channel Insert Return 2.5 kOhm
All Other Inputs 10 kOhm or greater
Tape Out 1 kOhm
All Other Output 120 Ohm
Equalization
Hi-shelving +/-15 dB @12 kHz
Mid bell (Mono) +/-15 dB -frequency range 100 Hz~8 kHz
Hi-Mid (Stereo) +/-15 dB @ 3 kHz
Mid-Low (Stereo) +/-15 dB @ 500 Hz
Low-shelving
+/-15 dB @ 80 Hz
Low Cut Filter 75 Hz, 18 dB/Oct.
DSP Section
A/D & D/A Converters 24-Bit
DSP Resolution 24-Bit
Type of Effects Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (Max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY, REVERB+CHORUS,
REVERB+FLANGER Combinations
Presets
256
Controls 16-Position PRESET Selector
16-Position VARIATION Selector
DSP MUTE SWITCH with PEAK LED Indicator
Main Mix Section
Noise (Bus Noise) Fader 0 dB, Channels Muted: -100 dBr (ref.: +4 dBu)
Fader 0 dB, all input channels assigned and set to
UNITY Gain: 90 dBr (ref.:+4 dBu)
Max Output +22 dBu Balanced XLR
+22 dBu Unbalanced, 1/4" jacks
AUX Returns Gain Range
- to +15 dB
+22 dBu
AUX Sends Max Out
Power Supply
Main Voltage USA/Canada
Europe
U.K./Australia
Power Consumption 70 Watts
Fuse T1.6 AL
Main Connection Standard IEC Receptacle
Physical
Dimension (W D H) 737 mm 400 mm 115 mm (29" 15.7" 4.5")
Net Weight 9.22 Kg (20.3 lbs)
100-120 VAC~60 Hz
210-240 VAC~ 50 Hz
240 VAC~ 50 Hz
19