Technical Specification; Mono Input Channels; Stereo Input Channels; Impedances - Alto PM-12 DRAGONFLY User Manual

8. TECHNICAL SPECIFICATION

Mono input channels

Stereo input channels

Impedances

Equalization
DSP Section
Main Mix Section
Microphone input
Frequency response
Distortion (THD & N)
Gain range
SNR (Signal to Noise Ratio)
Line input
Frequency response
Distortion (THD & N)
Sensitivity range
Line input
Frequency response
Distortion (THD & N)
Microphone input
Channel Insert return
All other inputs
Tape out
All other output
Hi shelving
Mid bell (mono)
Hi Mid (stereo)
Mid low (stereo)
Low shelving
Low Cut filter
A/D and D/A converters
DSP resolution
Type of effects
Presets
Controls
Noise (Bus noise)
Max output
AUX Returns gain range
AUX Sends max out
electronically balanced, discrete input configuration
10Hz to 55kHz, +
0.005% at 4dBu, 1kHz +
0dB to 45dB (MIC)
115dB
electronically balanced
10Hz to 55kHz, +
0.005% at 4dBu, 1kHz +
+15dBu to 30dBu
Balanced/unbalanced
10Hz to 55kHz,
+
0.005% at +4dBu, 1kHz
1.4kOhm
2.5kOhm
10kOhm or greater
1kOhm
120Ohm
+ 15dB @12kHz
+ 15dB @100Hz to 8kHz
+ 15dB @ 3kHz
+ 15dB @500Hz
+ 15dB @80Hz
75Hz, 18dB/oct.
24 bit
24 bit
Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY, REVERB+CHORUS,
REVERB+FLANGER combinations
256
16-position PRESET Selector
16-position VARIATION selector
PEAK LED
MUTE SWITCH with LED indicator
Fader 0 dB, channels muted: 100dBr (ref.:+4dBu)
Fader 0dB, all input channels assigned and set to
UNITY gain: 90dBr (ref.:+4dBu)
+22dBu balanced XLR,
+ 22dBu unbalanced, 1/4" jacks
- to +15dB
+22dBu
31
3dB
3dB
3dB