Technical Specification - Alto LYNX-MIX 124UM User Manual

9. TECHNICAL SPECIFICATION

Mono Input Channels
Microphone Input
Frequency Response
Distortion (THD & N)
Gain Range
SNR (Signal to Noise Ratio)
Line Input
Frequency Response
Distortion (THD & N)
Sensitivity Range
Stereo Input Channels
Line Input
Frequency R esponse
Distortion (THD & N)
Impedances
Microphone Input
Channel Insert Return
All Other Inputs
Tape Out
All Other Output
Equalization
Hi-shelving
Mid bell (Mono)
Hi-Mid (Stereo)
Mid-Low (Stereo)
Low-shelving
Low Cut Filter
DSP Section
A/D & D/A Converters
DSP Resolution
Type of Effects
Presets
Controls
Main Mix Section
Noise (Bus Noise)
Max Output
AUX Returns Gain Range
AUX Sends Max Out
Power Supply
Main Voltage
Power Consumption
Fuse
Main Connection
Physical
Dimension (W D H)
Net Weight
24
Electronically balanced, discrete input configuration
10 Hz to 55 kHz, +/-3 dB
0.005% at + 4 dBu, 1 kHz
0 dB to 50 dB (MIC)
115 dB
Electronically balanced
10 Hz to 55 kHz, +/-3 dB
0.005% at +4 dBu, 1 kHz
+15 dBu to -35 dBu
Balanced/Unbalanced
10 Hz to 55 kHz, + /-3 dB
0.005% at +4 dBu, 1 kHz
1.4 kOhm
2.5 kOhm
10 kOhm or greater
1 kOhm
120 Ohm
+/-15 dB @12 kHz
+/-15 dB -frequency range 100 Hz~8 kHz
+/-15 dB @ 3 kHz
+/-15 dB @ 500 Hz
+/-15 dB @ 80 Hz
75 Hz, 18 dB/Oct.
24-Bit
24-Bit
Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (Max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS, REVERB+DELAY
REVERB+CHORUS, REVERB+FLANGER Combinations
256
16-Position PRESET/VARIATION Selector
DSP MUTE SWITCH with PEAK LED Indicator
Fader 0 dB, Channels Muted: -100 dBr (ref.: +4 dBu)
Fader 0 dB, all input channels assigned and set to
UNITY Gain: 90 dBr (ref.:+4 dBu)
+22 dBu Balanced XLR; +22 dBu Unbalanced, 1/4" jacks
- to +15 dB
+22 dBu
USA/Canada
Europe
U.K./Australia
40 Watts
T1.25 AL
Standard IEC Receptacle
415 mm 400 mm 38/115 mm (16.34" 15.75" 1.49"/4.53")
6.7 Kg (14.8 lb)
100-120 VAC~60 Hz
210-240 VAC~ 50 Hz
240 VAC~ 50 Hz