Replacing The License Plate Light Bulb; Front Wheel - Yamaha FZS10A Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24313
1
1. License plate light bulb
2. License plate light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.

Front wheel

To remove the front wheel
To avoid injury, securely support the
2
vehicle so there is no danger of it
falling over.
1. Place the vehicle on the center-
2. Loosen the front wheel axle pinch
1. Front wheel axle pinch bolt
2. Wheel axle
3. Brake caliper bolt
7-36
WARNING
stand.
bolt, then the wheel axle and the
brake caliper bolts.
3
2
1
EAU24360
EAU40201
EWA10821
7