Yamaha FZS10A Owner's Manual page 65

1. Fuel tank bolt
5. Lift the front of the fuel tank, and
carefully tilt it back and away from
the air filter case, but do not dis-
connect the fuel
WARNING! Make sure that the
fuel tank is well supported. Do
not tilt or pull the fuel tank too
much, otherwise the fuel hoses
may come loose, which could
cause fuel leakage and a fire
hazard.
[EWA10411]
PERIODIC MAINTENANCE AND ADJUSTMENT
6. Remove the air filter case cover by
removing the screws. NOTICE:
When removing the air filter
case cover, be careful not to al-
low foreign objects to drop into
hoses.
the air intake manifold.
1. Screw
2. Air filter case cover
7. Pull the air filter element out.
1. Air filter element
2. Air intake manifold
8. Insert a new air filter element into
[ECA12881]
9. Install the air filter case cover by in-
10. Place the fuel tank in the original
7-16
the air filter case. NOTICE: Make
sure that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively
[ECA10481]
stalling the screws.
position. Make sure that the fuel
hoses are properly connected and
routed, and not pinched. Be sure
to place the fuel tank breather
7
worn.