Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha FZS10A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 4-15.)
2. Remove the tail/brake light bulb
socket (together with the bulb) by
turning it counterclockwise.
7
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
EAU24115
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
1. Turn signal light unit
2. Screw
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
EAU43003
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by pull-
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with the
6. Install the turn signal light unit by
7-35
ing it out.
bulb) by turning it clockwise.
installing the screw.