Yamaha FZS10A Owner's Manual page 82

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Battery band
2. Battery cover
3. Remove the starter relay cover by
pulling it upward.
1
7
1. Starter relay cover
2. Fuel injection system fuse
3. Fuel injection system spare fuse
4. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuses:
Main fuse:
50.0 A
Headlight fuse:
20.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
15.0 A
2
Fuel injection system fuse:
15.0 A
Radiator fan fuse:
10.0 A × 2
3
Backup fuse:
10.0 A
5. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
6. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
7-33
7. Install the starter relay cover.
8. Install the battery cover, and then
hook the battery band onto the
holder.
[EWA15131]