Power Management Setup; Modem Use Irq - AMD MB500 User Manual

Power Management Setup

The Power Management Setup allows you to save energy of your system
effectively.
ACPI Function
ACPI Suspend Type
Power Management
** PM Timers **
Standby Mode
Suspend Mode

Modem Use IRQ

PME Event Function
Soft-Off by PWR-BTTN
Power-On by Alarm
Time (hh:mm:ss) Alarm
IRQ Wakeup Events
Power Management
The options for the power management setting are Disabled, Legacy and
APM.
Modem Use IRQ
The default setting of this field is 3.
Soft-Off by PWRBTN
This field defines the power-off mode when using an ATX power
supply. The Instant Off mode allows powering off immediately upon
pressing the power button. In the Delay 4 Sec mode, the system powers
off when the power button is pressed for more than four seconds or
enters the suspend mode when pressed for less than 4 seconds.
PM Timers and IRQ Wakeup Events
The HDD, FDD, COM, LPT Ports, and PCI PIRQ are I/O events that can
prevent the system from entering a power saving mode or can awaken
the system from such a mode. When an I/O device wants to gain the
attention of the operating system, it signals this by causing an IRQ to
occur. When the operating system is ready to respond to the request, it
interrupts itself and performs the service.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Enabled
S1 (POS)
ACPI
Disabled
Disabled
N/A
Disabled
Instant-Off
Disabled
0
Press Enter
MB500 User's Manual
BIOS SETUP
ITEM HELP
Menu Level >
37