BIOS
4-5 Power Management Setup
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not be
changed unless it's absolutely necessary.
ACPI Suspend Type
This item allows you to select S1(Power-On-Suspend) or S3(Suspend-To-RAM)
function.
Options: S1(POS), S3(STR), S1&S3.
Soft-Off by PBTN
Use this to select your soft-off function. The default is Instant Off.
Instant Off:
Delay 4 Second :
NV Lan WOL From Soft-Off
When enabled, NV LAN activity awakens the system from soft-off state.
Options: Enabled, Disabled.
Page 4-12
Figure 6: Power Management
Turns off the system instantly.
Turns off the system after a 4 second delay. If momentary press
of button, the system will go into Suspend Mode. Press the
power button again to make system back to work.