Master Security Setup Procedures; Setting The System Security Options For A Netlinx Master (Security Options Menu) - AMX NetLinx Integrated Controller NI-4000 Instruction Manual

Master Security Setup Procedures

Setting the system security options for a NetLinx Master (Security Options Menu)

1. Enter the URL/IP Address of the target Master into the Address/URL field within the web
browser. Refer to the Accessing the NetLinx Master via its IP Address section on page 55 for
more detailed instructions on using your web browser to access your Master.
2. Click on the Security tab. By default this tab is blank until a security option is selected from
the left of the browser window. Refer to the Security Tab section on page 57 for more detailed
descriptions on the security configuration options.
3. Click the Enable Security link (on the left of the browser window) to populate the Security tab
with NetLinx Master security options (FIG. 48) that can individually be enabled or disabled.
FIG. 48 Security tab - showing NetLinx Master security options
By default, Master Security and SSL Enable are disabled (unchecked), including the
Master Security subcomponents: Terminal Access, HTTP Access, Telnet Access, and
Security Configuration Access.
4. Click on the checkbox next to Master Security to enable the security on the target Master.
Placing a check in this field allows you to alter the security properties for the remaining Master
Security options (Terminal/HTTP/Telnet/Security Configuration). Refer to the Security tab -
Enable Security page section on page 58 for more detailed field descriptions.
Each selection simply toggles the security setting from enabled to disabled. Click OK
after making any changes to these features so that those alterations are then saved
to the target Master.
5. Before enabling the SSL security, a user must first develop and then install a self-generated
Certificate onto the Master. Refer to the Self-Generating a SSL Server Certificate
Request section on page 82.
This initial installation allows users to then later install the different types of
certificates (requested, self-generated, or regenerated).
NetLinx Integrated Controllers
NetLinx Security and Web Server
71